2019 INFINITI Q70 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2019 INFINITI Q70, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 40-50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2019 Q70 — Year-Specific Fitment Context
The 2019 model year is the final year of the INFINITI Q70's 5x114.3 bolt pattern run (since 2014). Wheels from any 2014–2019 INFINITI Q70 are cross-compatible with the 2019 model.
INFINITI Q70 Bolt Pattern by Year
The table below shows how the Q70's wheel specifications have changed over the years. The 2019 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2019 INFINITI Q70
For your 2019 INFINITI Q70, the bolt pattern is 5x114.3 with a critical center bore of 66.1mm. Aftermarket wheels often have a larger bore, so hub-centric rings are mandatory to prevent vibration and ensure proper load distribution. Offset must stay within 40-50mm; deviating can cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.25) and seat type—either conical (60-degree) or ball seat, matching the wheel's design. Improper lug nuts can lead to wheel loosening. Re-torque after 50-100 miles. This final year shares compatibility with 2014-2019 Q70 models.
Historical Fitment Data Reference
In our dataset, INFINITI Q70 appears from 2014 to 2019 (6 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 90.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles of driving.
- ✅ When using aftermarket wheels, ensure hub-centric rings are installed to match the 66.1mm center bore.
- ✅ Avoid offsets below 40mm or above 50mm to prevent fender rubbing or brake caliper contact.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2019 INFINITI Q70 — Frequently Asked Questions
What is the bolt pattern for a 2019 INFINITI Q70?
The 2019 INFINITI Q70 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 40-50mm.
What other years of INFINITI Q70 have the same bolt pattern as the 2019?
The INFINITI Q70 uses the 5x114.3 pattern from 2014 through 2019. Wheels from any of these model years are dimensionally compatible with the 2019, provided the offset and center bore also match.
What is the center bore of a 2019 INFINITI Q70?
The factory center bore (hub bore) for the 2019 INFINITI Q70 is 66.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What does 40-50mm offset mean for the 2019 Q70?
An offset of 40-50mm means the wheel's mounting surface is 40-50mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your INFINITI.
What is the factory wheel offset for a 2019 INFINITI Q70?
The OEM offset for the 2019 Q70 is typically around 40-50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What lug nut size does the 2019 INFINITI Q70 use?
The 2019 INFINITI Q70 uses 12x1.25 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset