2015 Nissan Rogue Select Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2015 Nissan Rogue Select, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2015 Rogue Select — Year-Specific Fitment Context
The 2015 model year is the final year of the Nissan Rogue Select's 5x114.3 bolt pattern run (since 2014). Wheels from any 2014–2015 Nissan Rogue Select are cross-compatible with the 2015 model.
Nissan Rogue Select Bolt Pattern by Year
The table below shows how the Rogue Select's wheel specifications have changed over the years. The 2015 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2014 | 5x114.3 | 66.1 | 40 |
| ▸ 2015 | 5x114.3 | 66.1 | 40 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2015 Nissan Rogue Select
For your 2015 Nissan Rogue Select, the bolt pattern is 5x114.3 with a center bore of 66.1mm. When selecting aftermarket wheels, ensure they have a center bore of at least 66.1mm; if larger, use hub-centric rings to prevent vibration and ensure proper load distribution. The offset should stay close to 40mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.25) and seat type—factory wheels use a conical (60-degree) seat. Never use ball-seat lug nuts on conical wheels, as this can lead to wheel loosening. Re-torque lug nuts after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Nissan Rogue Select appears from 2014 to 2015 (2 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles of driving.
- ✅ If using aftermarket wheels with a larger center bore, install hub-centric rings to match the 66.1mm hub.
- ✅ Avoid spacers unless necessary; if used, ensure they are hub-centric and do not alter offset beyond safe limits.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2015 Nissan Rogue Select — Frequently Asked Questions
What is the bolt pattern for a 2015 Nissan Rogue Select?
The 2015 Nissan Rogue Select uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 40mm.
What other years of Nissan Rogue Select have the same bolt pattern as the 2015?
The Nissan Rogue Select uses the 5x114.3 pattern from 2014 through 2015. Wheels from any of these model years are dimensionally compatible with the 2015, provided the offset and center bore also match.
What is the factory wheel offset for a 2015 Nissan Rogue Select?
The OEM offset for the 2015 Rogue Select is typically around 40mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How do I measure the bolt pattern on my 2015 Nissan?
The 2015 Rogue Select uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Can I put aftermarket wheels on my 2015 Nissan Rogue Select?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 40mm, and a center bore of at least 66.1mm (using hub rings if larger).
What lug nut size does the 2015 Nissan Rogue Select use?
The 2015 Nissan Rogue Select uses 12x1.25 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset