1996 Nissan 200SX Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1996 Nissan 200SX, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
1996 200SX — Year-Specific Fitment Context
The 1996 model year marks the beginning of the Nissan 200SX's 5x114.3 bolt pattern era, which continued through 1998 (3 consecutive years). Wheels from any 1996–1998 Nissan 200SX are cross-compatible with the 1996 model. Note: the 1995 model used a different pattern (4x114.3), so its wheels are NOT interchangeable with the 1996. Across its full production run (1995–1998), the 200SX has also used: 4x114.3.
Nissan 200SX Bolt Pattern by Year
The table below shows how the 200SX's wheel specifications have changed over the years. The 1996 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 1996 Nissan 200SX
For your 1996 Nissan 200SX, the bolt pattern is 5x114.3, center bore 66.1mm, and offset around 40mm. When selecting aftermarket wheels, ensure the center bore matches or use hub-centric rings to prevent vibrations. The offset is sensitive; staying within ±5mm of 40mm is recommended to avoid rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.25) and seat type (cone or ball seat as per wheel manufacturer). Improper lug nuts can lead to wheel loosening. Verify fitment with a test fit before final installation.
Historical Fitment Data Reference
In our dataset, Nissan 200SX appears from 1995 to 1998 (4 model years). Across model years, this model appears with 2 bolt patterns (4x114.3, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 4.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using wheels from 1995 200SX (4x114.3) as they are not compatible.
- ✅ Check brake caliper clearance when using wheels with lower offset or larger diameter.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1996 Nissan 200SX — Frequently Asked Questions
What is the bolt pattern for a 1996 Nissan 200SX?
The 1996 Nissan 200SX uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 40mm.
What other years of Nissan 200SX have the same bolt pattern as the 1996?
The Nissan 200SX uses the 5x114.3 pattern from 1996 through 1998. Wheels from any of these model years are dimensionally compatible with the 1996, provided the offset and center bore also match.
Can I use 1995 Nissan 200SX wheels on a 1996?
No. The 1995 200SX used a 4x114.3 bolt pattern, which differs from the 1996's 5x114.3. They are not interchangeable.
What lug nut size does the 1996 Nissan 200SX use?
The 1996 Nissan 200SX uses N 12x1.25 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Can I use spacers on my 1996 Nissan 200SX?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 66.1mm center bore. Also verify that you have enough thread engagement for your N 12x1.25 hardware.
What is the PCD for a 1996 Nissan 200SX?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 1996 200SX, the PCD is 5x114.3.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset