2007 INFINITI QX Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2007 INFINITI QX, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2007 QX — Year-Specific Fitment Context
The 2007 INFINITI QX is in year 11 of 17 using the 5x114.3 pattern (1997–2013). Wheels from any 1997–2013 INFINITI QX are cross-compatible with the 2007 model. Note: the 2006 model used a different pattern (6x139.7), so its wheels are NOT interchangeable with the 2007. Across its full production run (1997–2013), the QX has also used: 6x139.7.
INFINITI QX Bolt Pattern by Year
The table below shows how the QX's wheel specifications have changed over the years. The 2007 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1997 | 5x114.3 | 66.1 | 40-50 |
| 1998 | 5x114.3 | 66.1 | 40-50 |
| 1999 | 5x114.3 | 66.1 | 40-50 |
| 2000 | 5x114.3 | 66.1 | 40-50 |
| 2001 | 5x114.3 | 66.1 | 40-50 |
| 2002 | 5x114.3 | 66.1 | 40-50 |
| 2003 | 6x139.7 | 78.1 | 25 |
| 2004 | 6x139.7 | 78.1 | 25 |
| 2005 | 6x139.7 | 78.1 | 25 |
| 2006 | 6x139.7 | 78.1 | 25 |
| ▸ 2007 | 5x114.3 | 66.1 | 40 |
| 2008 | 5x114.3 | 66.1 | 40 |
| 2009 | 5x114.3 | 66.1 | 40 |
| 2010 | 5x114.3 | 66.1 | 40 |
| 2011 | 5x114.3 | 66.1 | 40 |
| 2012 | 5x114.3 | 66.1 | 40 |
| 2013 | 5x114.3 | 66.1 | 40 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2007 INFINITI QX
The 2007 INFINITI QX uses a 5x114.3 bolt pattern with a 66.1mm center bore and a recommended offset of 40mm. When selecting aftermarket wheels, ensure the center bore matches or use hub-centric rings to prevent vibration and ensure proper load distribution. The offset is sensitive; deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.25) and seat type (conical 60-degree). Improper lug nuts can lead to wheel loosening. For safety, verify that wheels are hub-centric and lug nuts are torqued to manufacturer specifications.
Historical Fitment Data Reference
In our dataset, INFINITI QX appears from 1997 to 2013 (17 model years). Across model years, this model appears with 2 bolt patterns (5x114.3, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 90.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using wheels from the 2006 QX (6x139.7 pattern) as they are not interchangeable.
- ✅ Check for caliper clearance when using wheels with offset below 35mm or above 45mm.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2007 INFINITI QX — Frequently Asked Questions
What is the bolt pattern for a 2007 INFINITI QX?
The 2007 INFINITI QX uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 40mm.
What other years of INFINITI QX have the same bolt pattern as the 2007?
The INFINITI QX uses the 5x114.3 pattern from 1997 through 2013. Wheels from any of these model years are dimensionally compatible with the 2007, provided the offset and center bore also match.
Can I use 2006 INFINITI QX wheels on a 2007?
No. The 2006 QX used a 6x139.7 bolt pattern, which differs from the 2007's 5x114.3. They are not interchangeable.
Do 2007 INFINITI QXs use lug bolts or lug nuts?
The 2007 QX requires N 12x1.25 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the center bore of a 2007 INFINITI QX?
The factory center bore (hub bore) for the 2007 INFINITI QX is 66.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What lug nut size does the 2007 INFINITI QX use?
The 2007 INFINITI QX uses N 12x1.25 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset