2001 INFINITI QX Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2001 INFINITI QX, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 40-50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2001 QX — Year-Specific Fitment Context
The 2001 INFINITI QX is in year 5 of 17 using the 5x114.3 pattern (1997–2013). Wheels from any 1997–2013 INFINITI QX are cross-compatible with the 2001 model. Across its full production run (1997–2013), the QX has also used: 6x139.7.
INFINITI QX Bolt Pattern by Year
The table below shows how the QX's wheel specifications have changed over the years. The 2001 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1997 | 5x114.3 | 66.1 | 40-50 |
| 1998 | 5x114.3 | 66.1 | 40-50 |
| 1999 | 5x114.3 | 66.1 | 40-50 |
| 2000 | 5x114.3 | 66.1 | 40-50 |
| ▸ 2001 | 5x114.3 | 66.1 | 40-50 |
| 2002 | 5x114.3 | 66.1 | 40-50 |
| 2003 | 6x139.7 | 78.1 | 25 |
| 2004 | 6x139.7 | 78.1 | 25 |
| 2005 | 6x139.7 | 78.1 | 25 |
| 2006 | 6x139.7 | 78.1 | 25 |
| 2007 | 5x114.3 | 66.1 | 40 |
| 2008 | 5x114.3 | 66.1 | 40 |
| 2009 | 5x114.3 | 66.1 | 40 |
| 2010 | 5x114.3 | 66.1 | 40 |
| 2011 | 5x114.3 | 66.1 | 40 |
| 2012 | 5x114.3 | 66.1 | 40 |
| 2013 | 5x114.3 | 66.1 | 40 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2001 INFINITI QX
For your 2001 INFINITI QX, the bolt pattern is 5x114.3 with a center bore of 66.1mm. When selecting aftermarket wheels, ensure they are hub-centric or use hub-centric rings to avoid vibration. The offset range is 40-50mm; staying within this range prevents rubbing on suspension or fenders. Always use lug nuts with the correct thread pitch (12x1.25) and seat type (cone or ball seat) to ensure proper clamping force. Never use incorrect lug nuts as they can loosen or damage the wheel. Cross-compatible wheels from 1997-2013 QX models share the same bolt pattern, but verify offset and bore.
Historical Fitment Data Reference
In our dataset, INFINITI QX appears from 1997 to 2013 (17 model years). Across model years, this model appears with 2 bolt patterns (5x114.3, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 90.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using wheels with a center bore larger than 66.1mm without hub-centric rings; vibration and stress on studs may occur.
- ✅ Check for brake caliper clearance when using wheels with offset near 40mm, as some aftermarket designs may interfere.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2001 INFINITI QX — Frequently Asked Questions
What is the bolt pattern for a 2001 INFINITI QX?
The 2001 INFINITI QX uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 40-50mm.
What other years of INFINITI QX have the same bolt pattern as the 2001?
The INFINITI QX uses the 5x114.3 pattern from 1997 through 2013. Wheels from any of these model years are dimensionally compatible with the 2001, provided the offset and center bore also match.
What is the factory wheel offset for a 2001 INFINITI QX?
The OEM offset for the 2001 QX is typically around 40-50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How tight should I torque the lug nuts on a 2001 INFINITI QX?
Refer to your owner's manual for exact specs, but always tighten the 12x1.25 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Do 2001 INFINITI QXs use lug bolts or lug nuts?
The 2001 QX requires 12x1.25 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Can I put aftermarket wheels on my 2001 INFINITI QX?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 40-50mm, and a center bore of at least 66.1mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset