2011 INFINITI QX Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2011 INFINITI QX is 5x114.3 (5x4.5"). It has a center bore of 66.1 mm, an offset range of 40, and utilizes N 12x1.25 (Cone seat, 21mm hex) fasteners tightened to 80 ft-lbs (108 Nm).
2011 INFINITI QX Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 66.1 mm |
| Offset Range (ET) | 40 |
| Thread Size (Lug Nut / Bolt) | N 12x1.25 |
| Fastener Seat Type | Conical 60° (Cone / Tapered) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2011 QX — Year-Specific Fitment Context
The 2011 INFINITI QX is in year 15 of 17 using the 5x114.3 pattern (1997–2013). Wheels from any 1997–2013 INFINITI QX are cross-compatible with the 2011 model. Across its full production run (1997–2013), the QX has also used: 6x139.7.
INFINITI QX Bolt Pattern by Year
The table below shows how the QX's wheel specifications have changed over the years. The 2011 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1997 | 5x114.3 | 66.1 | 40-50 |
| 1998 | 5x114.3 | 66.1 | 40-50 |
| 1999 | 5x114.3 | 66.1 | 40-50 |
| 2000 | 5x114.3 | 66.1 | 40-50 |
| 2001 | 5x114.3 | 66.1 | 40-50 |
| 2002 | 5x114.3 | 66.1 | 40-50 |
| 2003 | 6x139.7 | 78.1 | 25 |
| 2004 | 6x139.7 | 78.1 | 25 |
| 2005 | 6x139.7 | 78.1 | 25 |
| 2006 | 6x139.7 | 78.1 | 25 |
| 2007 | 5x114.3 | 66.1 | 40 |
| 2008 | 5x114.3 | 66.1 | 40 |
| 2009 | 5x114.3 | 66.1 | 40 |
| 2010 | 5x114.3 | 66.1 | 40 |
| ▸ 2011 | 5x114.3 | 66.1 | 40 |
| 2012 | 5x114.3 | 66.1 | 40 |
| 2013 | 5x114.3 | 66.1 | 40 |
2011 INFINITI QX Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3165 vehicles in our database (very common). For safe wheel swaps on the 2011 INFINITI QX, donor rims must match the 5x114.3 PCD and have a center bore of at least 66.1 mm:
DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 66.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 1996 Nissan 200SX | 66.1 mm (Exact) | 40 | N 12x1.25 (Cone) |
| 1996 Nissan 240SX | 66.1 mm (Exact) | 40 | N 12x1.25 (Cone) |
| 1992 Nissan 300ZX | 66.1 mm (Exact) | 30 | N 12x1.25 (Cone) |
| 2003 Nissan 350Z | 66.1 mm (Exact) | 32 | N 12x1.25 (Cone) |
| 2009 Nissan 370Z | 66.1 mm (Exact) | 46 | N 12x1.25 (Cone) |
| 2022 Nissan 400Z | 66.1 mm (Exact) | 20-35mm | M12x1.25 (Cone) |
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2007 Mitsubishi Outlander | 67.1 mm | 67.1mm → 66.1mm |
46 |
| 2018 Mitsubishi Outlander PHEV | 67.1 mm | 67.1mm → 66.1mm |
38 |
| 2011 Mitsubishi Outlander Sport | 67.1 mm | 67.1mm → 66.1mm |
38 |
| 1992 Mitsubishi Precis | 67.1 mm | 67.1mm → 66.1mm |
38-46 |
| 2005 Panoz Esperante | 67.1 mm | 67.1mm → 66.1mm |
30-40mm |
| 1992 Plymouth Grand Voyager | 71.5 mm | 71.5mm → 66.1mm |
40 |
Expert Buying Guide for 2011 INFINITI QX
For your 2011 INFINITI QX, the 5x114.3 bolt pattern is shared with many vehicles, but the 66.1mm center bore is critical. Aftermarket wheels often have a larger bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibrations and ensure proper load transfer. The factory offset is 40mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use the correct lug nuts: 12x1.25 thread pitch with a conical (60-degree) or ball seat, matching the wheel's seat type. Improper lug nuts can lead to wheel loosening. Verify that aftermarket wheels are hub-centric and load-rated for your QX's weight.
Historical Fitment Data Reference
In our dataset, INFINITI QX appears from 1997 to 2013 (17 model years). Across model years, this model appears with 2 bolt patterns (5x114.3, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 90.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using universal 'mag' lug nuts; they may not seat correctly on OEM or aftermarket wheels.
- ✅ Check for brake caliper clearance when changing offset, as the QX has large brakes.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
2011 INFINITI QX — Frequently Asked Questions
What is the bolt pattern for a 2011 INFINITI QX?
The 2011 INFINITI QX uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 40mm.
What other years of INFINITI QX have the same bolt pattern as the 2011?
The INFINITI QX uses the 5x114.3 pattern from 1997 through 2013. Wheels from any of these model years are dimensionally compatible with the 2011, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2011 INFINITI QX?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.25 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What does 40mm offset mean for the 2011 QX?
An offset of 40mm means the wheel's mounting surface is 40mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your INFINITI.
What is the factory wheel offset for a 2011 INFINITI QX?
The OEM offset for the 2011 QX is typically around 40mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How do I measure the bolt pattern on my 2011 INFINITI?
The 2011 QX uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need Full Fitment Data in Bulk?
Stop scraping or looking up cars one by one. Import 12,400+ verified vehicle specs (1992–2025) directly into your Shopify store, inventory system, or custom automotive software.
Explore Master Database (CSV) →