2024 Nissan NV200 Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2024 Nissan NV200 is 5x114.3 (5x4.5"). It has a center bore of 66.1 mm, an offset range of 45, and utilizes 12x1.25 (Flat seat, 21mm hex) fasteners tightened to 83 ft-lbs (113 Nm).
2024 Nissan NV200 Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 66.1 mm |
| Offset Range (ET) | 45 |
| Thread Size (Lug Nut / Bolt) | 12x1.25 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 83 ft-lbs (113 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2024 NV200 — Year-Specific Fitment Context
The 2024 model year is the final year of the Nissan NV200's 5x114.3 bolt pattern run (since 2013). Wheels from any 2013–2024 Nissan NV200 are cross-compatible with the 2024 model.
Nissan NV200 Bolt Pattern by Year
Looking for all generations? View the complete Nissan NV200 (2013–2024) Bolt Pattern & Generation Guide →
The table below shows how the NV200's wheel specifications have changed over the years. The 2024 model year is highlighted.
2024 Nissan NV200 Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2024 Nissan NV200, donor rims must match the 5x114.3 PCD and have a center bore of at least 66.1 mm:
DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 66.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2008 Hyundai Santa Fe | 66.1 mm (Exact) | 41 | N 12x1.50 (Cone) |
| 2016 Hyundai Tucson | 66.1 mm (Exact) | 51 | N 12x1.50 (Cone) |
| 2015 INFINITI Q40 | 66.1 mm (Exact) | 40 | N 12x1.25 (Cone) |
| 2024 INFINITI Q50 | 66.1 mm (Exact) | 40-50 | 12x1.25 (Cone) |
| 2022 INFINITI Q60 | 66.1 mm (Exact) | 40-50 | 12x1.25 (Cone) |
| 2019 INFINITI Q70 | 66.1 mm (Exact) | 40-50 | 12x1.25 (Cone) |
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2025 Hyundai Elantra | 67.1 mm | 67.1mm → 66.1mm |
40-53 |
| 2020 Hyundai Elantra GT | 67.1 mm | 67.1mm → 66.1mm |
35-50 |
| 2025 Hyundai Elantra Hybrid | 67.1 mm | 67.1mm → 66.1mm |
35-50 |
| 2025 Hyundai Elantra N | 67.1 mm | 67.1mm → 66.1mm |
55 |
| 2016 Hyundai Equus | 67.1 mm | 67.1mm → 66.1mm |
35-50 |
| 2016 Hyundai Genesis | 67.1 mm | 67.1mm → 66.1mm |
35 |
Quick Tips & Safety Warnings
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 83 ft-lbs (113 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2024 Nissan NV200 — Frequently Asked Questions
What is the bolt pattern for a 2024 Nissan NV200?
The 2024 Nissan NV200 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 45mm.
What other years of Nissan NV200 have the same bolt pattern as the 2024?
The Nissan NV200 uses the 5x114.3 pattern from 2013 through 2024. Wheels from any of these model years are dimensionally compatible with the 2024, provided the offset and center bore also match.
What lug nut size does the 2024 Nissan NV200 use?
The 2024 Nissan NV200 uses 12x1.25 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Will wheels from another Nissan fit my 2024 NV200?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 66.1mm.
What is the PCD for a 2024 Nissan NV200?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2024 NV200, the PCD is 5x114.3.
How do I measure the bolt pattern on my 2024 Nissan?
The 2024 NV200 uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →