2017 Nissan NV200 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2017 Nissan NV200, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 44 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2017 NV200 — Year-Specific Fitment Context
The 2017 Nissan NV200 is in year 5 of 9 using the 5x114.3 pattern (2013–2021). Wheels from any 2013–2021 Nissan NV200 are cross-compatible with the 2017 model.
Nissan NV200 Bolt Pattern by Year
The table below shows how the NV200's wheel specifications have changed over the years. The 2017 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2017 Nissan NV200
For the 2017 Nissan NV200, the 5x114.3 bolt pattern and 66.1mm center bore are critical. Aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load transfer. The factory offset is 44mm; deviations affect handling and tire clearance. Always verify offset to avoid rubbing or suspension contact. Lug nuts must be 12x1.25 thread pitch with a conical (60-degree) seat; using incorrect seat type can cause wheel loosening. For safety, re-torque after 50-100 miles and periodically thereafter. Stick to OEM or verified aftermarket wheels to maintain vehicle dynamics.
Historical Fitment Data Reference
In our dataset, Nissan NV200 appears from 2013 to 2021 (9 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 4.0 mm
Quick Tips & Safety Warnings
- ✅ Always use hub-centric rings if aftermarket wheels have a larger center bore than 66.1mm to prevent vibrations.
- ✅ Re-torque lug nuts to 80-100 ft-lbs after 50-100 miles of driving, then check periodically.
- ✅ Avoid wheels with offset below 35mm or above 50mm to prevent rubbing or clearance issues.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2017 Nissan NV200 — Frequently Asked Questions
What is the bolt pattern for a 2017 Nissan NV200?
The 2017 Nissan NV200 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 44mm.
What other years of Nissan NV200 have the same bolt pattern as the 2017?
The Nissan NV200 uses the 5x114.3 pattern from 2013 through 2021. Wheels from any of these model years are dimensionally compatible with the 2017, provided the offset and center bore also match.
What is the center bore of a 2017 Nissan NV200?
The factory center bore (hub bore) for the 2017 Nissan NV200 is 66.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
How tight should I torque the lug nuts on a 2017 Nissan NV200?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.25 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the factory wheel offset for a 2017 Nissan NV200?
The OEM offset for the 2017 NV200 is typically around 44mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Can I put aftermarket wheels on my 2017 Nissan NV200?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 44mm, and a center bore of at least 66.1mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset