2020 Nissan NV200 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2020 Nissan NV200, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2020 NV200 — Year-Specific Fitment Context
The 2020 Nissan NV200 is in year 8 of 9 using the 5x114.3 pattern (2013–2021). Wheels from any 2013–2021 Nissan NV200 are cross-compatible with the 2020 model.
Nissan NV200 Bolt Pattern by Year
The table below shows how the NV200's wheel specifications have changed over the years. The 2020 model year is highlighted.
Fitment Notes
The 2020 Nissan NV200 has a bolt pattern of 5x114.3.
Imperial Conversion: This bolt pattern is commonly referred to as 5x4.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x4.5".
This means it is a 5 lug pattern with a circle diameter of 114.3mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Nissan NV200 appears from 2013 to 2021 (9 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 4.0 mm
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
2020 Nissan NV200 — Frequently Asked Questions
What is the bolt pattern for a 2020 Nissan NV200?
The 2020 Nissan NV200 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 40mm.
What other years of Nissan NV200 have the same bolt pattern as the 2020?
The Nissan NV200 uses the 5x114.3 pattern from 2013 through 2021. Wheels from any of these model years are dimensionally compatible with the 2020, provided the offset and center bore also match.
What lug nut size does the 2020 Nissan NV200 use?
The 2020 Nissan NV200 uses 12x1.25 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
How do I measure the bolt pattern on my 2020 Nissan?
The 2020 NV200 uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
How tight should I torque the lug nuts on a 2020 Nissan NV200?
Refer to your owner's manual for exact specs, but always tighten the 12x1.25 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the PCD for a 2020 Nissan NV200?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2020 NV200, the PCD is 5x114.3.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Nissan NV200 is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2013-2021 (9 model years).
- Observed bolt-pattern variants: 1 (5x114.3).
- Observed total offset span across years: 4.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 2.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2020 Nissan NV200, please report it via our About page contact so we can verify and update this record.