2025 Nissan Murano Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2025 Nissan Murano is 5x114.3 (5x4.5"). It has a center bore of 66.1 mm, an offset range of 35-45, and utilizes 12x1.25 (Flat seat, 21mm hex) fasteners tightened to 83 ft-lbs (113 Nm).
2025 Nissan Murano Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 66.1 mm |
| Offset Range (ET) | 35-45 |
| Thread Size (Lug Nut / Bolt) | 12x1.25 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 83 ft-lbs (113 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2025 Murano — Year-Specific Fitment Context
The 2025 Nissan Murano is in year 23 of 24 using the 5x114.3 pattern (2003–2026). Wheels from any 2003–2026 Nissan Murano are cross-compatible with the 2025 model.
Nissan Murano Bolt Pattern by Year
Looking for all generations? View the complete Nissan Murano (2003–2026) Bolt Pattern & Generation Guide →
The table below shows how the Murano's wheel specifications have changed over the years. The 2025 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2003 | 5x114.3 | 66.1 | 38 |
| 2004 | 5x114.3 | 66.1 | 38 |
| 2005 | 5x114.3 | 66.1 | 38 |
| 2006 | 5x114.3 | 66.1 | 38 |
| 2007 | 5x114.3 | 66.1 | 38 |
| 2009 | 5x114.3 | 66.1 | 38 |
| 2010 | 5x114.3 | 66.1 | 44 |
| 2011 | 5x114.3 | 66.1 | 44 |
| 2012 | 5x114.3 | 66.1 | 44 |
| 2013 | 5x114.3 | 66.1 | 44 |
| 2014 | 5x114.3 | 66.1 | 44 |
| 2015 | 5x114.3 | 66.1 | 44 |
| 2016 | 5x114.3 | 66.1 | 44 |
| 2017 | 5x114.3 | 66.1 | 40 |
| 2018 | 5x114.3 | 66.1 | 40 |
| 2019 | 5x114.3 | 66.1 | 40 |
| 2020 | 5x114.3 | 66.1 | 40 |
| 2021 | 5x114.3 | 66.1 | 40 |
| 2022 | 5x114.3 | 66.1 | 40 |
| 2023 | 5x114.3 | 66.1 | 40 |
| 2024 | 5x114.3 | 66.1 | 40 |
| ▸ 2025 | 5x114.3 | 66.1 | 35-45 |
| 2026 | 5x114.3 | 66.1 | 35-45 |
2025 Nissan Murano Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2025 Nissan Murano, donor rims must match the 5x114.3 PCD and have a center bore of at least 66.1 mm:
DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 66.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2015 INFINITI Q40 | 66.1 mm (Exact) | 40 | N 12x1.25 (Cone) |
| 2024 INFINITI Q50 | 66.1 mm (Exact) | 40-50 | 12x1.25 (Cone) |
| 2022 INFINITI Q60 | 66.1 mm (Exact) | 40-50 | 12x1.25 (Cone) |
| 2019 INFINITI Q70 | 66.1 mm (Exact) | 40-50 | 12x1.25 (Cone) |
| 2007 INFINITI QX | 66.1 mm (Exact) | 40 | N 12x1.25 (Cone) |
| 2019 INFINITI QX30 | 66.1 mm (Exact) | 40-50 | 12x1.25 (Cone) |
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2026 Hyundai Tucson | 67.1 mm | 67.1mm → 66.1mm |
35-45 |
| 2016 Hyundai Tucson Fuel Cell | 67.1 mm | 67.1mm → 66.1mm |
51 |
| 2025 Hyundai Tucson Hybrid | 67.1 mm | 67.1mm → 66.1mm |
35-50 |
| 2025 Hyundai Tucson Plug-in Hybrid | 67.1 mm | 67.1mm → 66.1mm |
35-50 |
| 2022 Hyundai Veloster | 67.1 mm | 67.1mm → 66.1mm |
35-50 |
| 2025 Hyundai Venue | 67.1 mm | 67.1mm → 66.1mm |
45-50 |
Quick Tips & Safety Warnings
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 83 ft-lbs (113 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2025 Nissan Murano — Frequently Asked Questions
What is the bolt pattern for a 2025 Nissan Murano?
The 2025 Nissan Murano uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 35-45mm.
What other years of Nissan Murano have the same bolt pattern as the 2025?
The Nissan Murano uses the 5x114.3 pattern from 2003 through 2026. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.
Do 2025 Nissan Muranos use lug bolts or lug nuts?
The 2025 Murano requires 12x1.25 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the center bore of a 2025 Nissan Murano?
The factory center bore (hub bore) for the 2025 Nissan Murano is 66.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
How tight should I torque the lug nuts on a 2025 Nissan Murano?
Refer to your owner's manual for exact specs, but always tighten the 12x1.25 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
How do I measure the bolt pattern on my 2025 Nissan?
The 2025 Murano uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →