2018 Nissan Murano Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2018 Nissan Murano, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2018 Murano — Year-Specific Fitment Context
The 2018 Nissan Murano is in year 16 of 22 using the 5x114.3 pattern (2003–2024). Wheels from any 2003–2024 Nissan Murano are cross-compatible with the 2018 model.
Nissan Murano Bolt Pattern by Year
The table below shows how the Murano's wheel specifications have changed over the years. The 2018 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2003 | 5x114.3 | 66.1 | 38 |
| 2004 | 5x114.3 | 66.1 | 38 |
| 2005 | 5x114.3 | 66.1 | 38 |
| 2006 | 5x114.3 | 66.1 | 38 |
| 2007 | 5x114.3 | 66.1 | 38 |
| 2009 | 5x114.3 | 66.1 | 38 |
| 2010 | 5x114.3 | 66.1 | 44 |
| 2011 | 5x114.3 | 66.1 | 44 |
| 2012 | 5x114.3 | 66.1 | 44 |
| 2013 | 5x114.3 | 66.1 | 44 |
| 2014 | 5x114.3 | 66.1 | 44 |
| 2015 | 5x114.3 | 66.1 | 44 |
| 2016 | 5x114.3 | 66.1 | 44 |
| 2017 | 5x114.3 | 66.1 | 40 |
| ▸ 2018 | 5x114.3 | 66.1 | 40 |
| 2019 | 5x114.3 | 66.1 | 40 |
| 2020 | 5x114.3 | 66.1 | 40 |
| 2021 | 5x114.3 | 66.1 | 40 |
| 2022 | 5x114.3 | 66.1 | 40 |
| 2023 | 5x114.3 | 66.1 | 40 |
| 2024 | 5x114.3 | 66.1 | 40 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2018 Nissan Murano
For your 2018 Nissan Murano, the bolt pattern is 5x114.3mm with a critical center bore of 66.1mm. Aftermarket wheels often have a larger bore; you must use hub-centric rings to prevent vibration and ensure proper load distribution. The factory offset is around 40mm; staying within ±5mm is recommended to avoid rubbing or suspension interference. Always use lug nuts with the correct thread pitch (12x1.25) and seat type—factory wheels use a conical (60-degree) seat. Using the wrong lug nuts can lead to wheel loosening. Verify that aftermarket wheels are hub-centric or use rings, and check offset carefully.
Historical Fitment Data Reference
In our dataset, Nissan Murano appears from 2003 to 2024 (21 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 6.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid wheels with a center bore larger than 66.1mm without hub-centric rings; vibration and wheel separation risk.
- ✅ Aftermarket wheels with offset below 35mm may rub the fender; offsets above 45mm may contact suspension components.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2018 Nissan Murano — Frequently Asked Questions
What is the bolt pattern for a 2018 Nissan Murano?
The 2018 Nissan Murano uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 40mm.
What other years of Nissan Murano have the same bolt pattern as the 2018?
The Nissan Murano uses the 5x114.3 pattern from 2003 through 2024. Wheels from any of these model years are dimensionally compatible with the 2018, provided the offset and center bore also match.
Will wheels from another Nissan fit my 2018 Murano?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 66.1mm.
What lug nut size does the 2018 Nissan Murano use?
The 2018 Nissan Murano uses 12x1.25 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Can I use spacers on my 2018 Nissan Murano?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 66.1mm center bore. Also verify that you have enough thread engagement for your 12x1.25 hardware.
Can I put aftermarket wheels on my 2018 Nissan Murano?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 40mm, and a center bore of at least 66.1mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset