2020 Nissan Murano Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2020 Nissan Murano, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2020 Murano — Year-Specific Fitment Context
The 2020 Nissan Murano is in year 18 of 22 using the 5x114.3 pattern (2003–2024). Wheels from any 2003–2024 Nissan Murano are cross-compatible with the 2020 model.
Nissan Murano Bolt Pattern by Year
The table below shows how the Murano's wheel specifications have changed over the years. The 2020 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2003 | 5x114.3 | 66.1 | 38 |
| 2004 | 5x114.3 | 66.1 | 38 |
| 2005 | 5x114.3 | 66.1 | 38 |
| 2006 | 5x114.3 | 66.1 | 38 |
| 2007 | 5x114.3 | 66.1 | 38 |
| 2009 | 5x114.3 | 66.1 | 38 |
| 2010 | 5x114.3 | 66.1 | 44 |
| 2011 | 5x114.3 | 66.1 | 44 |
| 2012 | 5x114.3 | 66.1 | 44 |
| 2013 | 5x114.3 | 66.1 | 44 |
| 2014 | 5x114.3 | 66.1 | 44 |
| 2015 | 5x114.3 | 66.1 | 44 |
| 2016 | 5x114.3 | 66.1 | 44 |
| 2017 | 5x114.3 | 66.1 | 40 |
| 2018 | 5x114.3 | 66.1 | 40 |
| 2019 | 5x114.3 | 66.1 | 40 |
| ▸ 2020 | 5x114.3 | 66.1 | 40 |
| 2021 | 5x114.3 | 66.1 | 40 |
| 2022 | 5x114.3 | 66.1 | 40 |
| 2023 | 5x114.3 | 66.1 | 40 |
| 2024 | 5x114.3 | 66.1 | 40 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2020 Nissan Murano
The 2020 Nissan Murano uses a 5x114.3 bolt pattern with a 66.1mm center bore. Aftermarket wheels must have a bore ≥66.1mm; use hub-centric rings to avoid vibration. Offset is sensitive: stock is 40mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use 12x1.25 lug nuts with the correct seat (conical 60° or ball seat) to prevent wheel loosening. Verify lug nut engagement (at least 6 full turns) and re-torque after 50-100 miles. Wheels from 2003-2024 Muranos are direct fit.
Historical Fitment Data Reference
In our dataset, Nissan Murano appears from 2003 to 2024 (21 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 6.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles of driving.
- ✅ Avoid spacers unless hub-centric; they can alter offset and stress bearings.
- ✅ Check brake caliper clearance with aftermarket wheels; some designs may interfere.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2020 Nissan Murano — Frequently Asked Questions
What is the bolt pattern for a 2020 Nissan Murano?
The 2020 Nissan Murano uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 40mm.
What other years of Nissan Murano have the same bolt pattern as the 2020?
The Nissan Murano uses the 5x114.3 pattern from 2003 through 2024. Wheels from any of these model years are dimensionally compatible with the 2020, provided the offset and center bore also match.
What is the center bore of a 2020 Nissan Murano?
The factory center bore (hub bore) for the 2020 Nissan Murano is 66.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Can I put aftermarket wheels on my 2020 Nissan Murano?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 40mm, and a center bore of at least 66.1mm (using hub rings if larger).
How do I measure the bolt pattern on my 2020 Nissan?
The 2020 Murano uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Will wheels from another Nissan fit my 2020 Murano?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 66.1mm.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset