2010 INFINITI QX Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2010 INFINITI QX is 5x114.3 (5x4.5"). It has a center bore of 66.1 mm, an offset range of 40, and utilizes N 12x1.25 (Cone seat, 21mm hex) fasteners tightened to 80 ft-lbs (108 Nm).
2010 INFINITI QX Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 66.1 mm |
| Offset Range (ET) | 40 |
| Thread Size (Lug Nut / Bolt) | N 12x1.25 |
| Fastener Seat Type | Conical 60Β° (Cone / Tapered) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2010 QX β Year-Specific Fitment Context
The 2010 INFINITI QX is in year 14 of 17 using the 5x114.3 pattern (1997β2013). Wheels from any 1997β2013 INFINITI QX are cross-compatible with the 2010 model. Across its full production run (1997β2013), the QX has also used: 6x139.7.
INFINITI QX Bolt Pattern by Year
The table below shows how the QX's wheel specifications have changed over the years. The 2010 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1997 | 5x114.3 | 66.1 | 40-50 |
| 1998 | 5x114.3 | 66.1 | 40-50 |
| 1999 | 5x114.3 | 66.1 | 40-50 |
| 2000 | 5x114.3 | 66.1 | 40-50 |
| 2001 | 5x114.3 | 66.1 | 40-50 |
| 2002 | 5x114.3 | 66.1 | 40-50 |
| 2003 | 6x139.7 | 78.1 | 25 |
| 2004 | 6x139.7 | 78.1 | 25 |
| 2005 | 6x139.7 | 78.1 | 25 |
| 2006 | 6x139.7 | 78.1 | 25 |
| 2007 | 5x114.3 | 66.1 | 40 |
| 2008 | 5x114.3 | 66.1 | 40 |
| 2009 | 5x114.3 | 66.1 | 40 |
| βΈ 2010 | 5x114.3 | 66.1 | 40 |
| 2011 | 5x114.3 | 66.1 | 40 |
| 2012 | 5x114.3 | 66.1 | 40 |
| 2013 | 5x114.3 | 66.1 | 40 |
2010 INFINITI QX Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3165 vehicles in our database (very common). For safe wheel swaps on the 2010 INFINITI QX, donor rims must match the 5x114.3 PCD and have a center bore of at least 66.1 mm:
DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 66.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2008 INFINITI EX | 66.1 mm (Exact) | 40 | N 12x1.25 (Cone) |
| 2003 INFINITI FX | 66.1 mm (Exact) | 35 | N 12x1.25 (Cone) |
| 1992 INFINITI G | 66.1 mm (Exact) | 40-50 | 12x1.25 (Cone) |
| 1996 INFINITI I | 66.1 mm (Exact) | 40-50 | 12x1.25 (Cone) |
| 1993 INFINITI J | 66.1 mm (Exact) | 40-50 | 12x1.25 (Cone) |
| 2013 INFINITI JX | 66.1 mm (Exact) | 40-50 | 12x1.25 (Cone) |
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD β ID) | OEM Offset (ET) |
|---|---|---|---|
| 2015 Hyundai Veloster | 67.1 mm | 67.1mm β 66.1mm |
46 |
| 2020 Hyundai Venue | 67.1 mm | 67.1mm β 66.1mm |
35-50 |
| 2007 Hyundai Veracruz | 67.1 mm | 67.1mm β 66.1mm |
35-50 |
| 2001 Hyundai XG300 | 67.1 mm | 67.1mm β 66.1mm |
35-50 |
| 2002 Hyundai XG350 | 67.1 mm | 67.1mm β 66.1mm |
35-50 |
| 1992 Jeep Cherokee | 71.6 mm | 71.6mm β 66.1mm |
32 |
Expert Buying Guide for 2010 INFINITI QX
For your 2010 INFINITI QX, the 5x114.3 bolt pattern is shared with many vehicles, but the 66.1mm center bore is critical. Aftermarket wheels often have a larger bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. The factory offset is around 40mm; deviations beyond Β±5mm may cause rubbing or clearance issues. Always use the correct lug nuts: 12x1.25 thread pitch with a conical (60-degree) or ball seat, matching the wheel's seat type. Never use incorrect lug nutsβthis can lead to wheel loss. Verify that aftermarket wheels are hub-centric or use rings, and check offset carefully to avoid suspension or brake contact.
Historical Fitment Data Reference
In our dataset, INFINITI QX appears from 1997 to 2013 (17 model years). Across model years, this model appears with 2 bolt patterns (5x114.3, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 90.0 mm
Quick Tips & Safety Warnings
- β Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- β Avoid using universal fit wheels without hub-centric rings; they can cause vibrations and stress on wheel studs.
- β If upgrading to larger wheels, confirm clearance with brake calipers and suspension components, especially with offset changes.
- β οΈ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- β οΈ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- β οΈ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- β οΈ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
2010 INFINITI QX β Frequently Asked Questions
What is the bolt pattern for a 2010 INFINITI QX?
The 2010 INFINITI QX uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 40mm.
What other years of INFINITI QX have the same bolt pattern as the 2010?
The INFINITI QX uses the 5x114.3 pattern from 1997 through 2013. Wheels from any of these model years are dimensionally compatible with the 2010, provided the offset and center bore also match.
Will wheels from another INFINITI fit my 2010 QX?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 66.1mm.
What is the center bore of a 2010 INFINITI QX?
The factory center bore (hub bore) for the 2010 INFINITI QX is 66.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What lug nut size does the 2010 INFINITI QX use?
The 2010 INFINITI QX uses N 12x1.25 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the PCD for a 2010 INFINITI QX?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2010 QX, the PCD is 5x114.3.
Need Full Fitment Data in Bulk?
Stop scraping or looking up cars one by one. Import 12,400+ verified vehicle specs (1992β2025) directly into your Shopify store, inventory system, or custom automotive software.
Explore Master Database (CSV) →