2022 Nissan 400Z Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2022 Nissan 400Z, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | M12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 20-35mm |
| Torque Specs | 80 ft-lbs (108 Nm) |
2022 400Z — Year-Specific Fitment Context
The 2022 is the only model year of the Nissan 400Z in our database using the 5x114.3 bolt pattern.
Fitment Notes
The 2022 Nissan 400Z has a bolt pattern of 5x114.3.
Imperial Conversion: This bolt pattern is commonly referred to as 5x4.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x4.5".
This means it is a 5 lug pattern with a circle diameter of 114.3mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Nissan 400Z appears from 2022 to 2022 (1 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 55.0 mm
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
2022 Nissan 400Z — Frequently Asked Questions
What is the bolt pattern for a 2022 Nissan 400Z?
The 2022 Nissan 400Z uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 20-35mmmm.
Do 2022 Nissan 400Zs use lug bolts or lug nuts?
The 2022 400Z requires M12x1.25 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
How tight should I torque the lug nuts on a 2022 Nissan 400Z?
Refer to your owner's manual for exact specs, but always tighten the M12x1.25 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Will wheels from another Nissan fit my 2022 400Z?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 66.1mm.
What is the center bore of a 2022 Nissan 400Z?
The factory center bore (hub bore) for the 2022 Nissan 400Z is 66.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What is the PCD for a 2022 Nissan 400Z?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2022 400Z, the PCD is 5x114.3.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Nissan 400Z is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2022-2022 (1 model years).
- Observed bolt-pattern variants: 1 (5x114.3).
- Observed total offset span across years: 55.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2022 Nissan 400Z, please report it via our About page contact so we can verify and update this record.