2025 INFINITI QX50 Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2025 INFINITI QX50 is 5x114.3 (5x4.5"). It has a center bore of 66.1 mm, an offset range of 35-45, and utilizes 12x1.25 (Flat seat, 21mm hex) fasteners tightened to 80 ft-lbs (108 Nm).
2025 INFINITI QX50 Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 66.1 mm |
| Offset Range (ET) | 35-45 |
| Thread Size (Lug Nut / Bolt) | 12x1.25 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2025 QX50 — Year-Specific Fitment Context
The 2025 INFINITI QX50 is in year 12 of 13 using the 5x114.3 pattern (2014–2026). Wheels from any 2014–2026 INFINITI QX50 are cross-compatible with the 2025 model.
INFINITI QX50 Bolt Pattern by Year
Looking for all generations? View the complete INFINITI QX50 (2014–2026) Bolt Pattern & Generation Guide →
The table below shows how the QX50's wheel specifications have changed over the years. The 2025 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2014 | 5x114.3 | 66.1 | 40 |
| 2015 | 5x114.3 | 66.1 | 40 |
| 2016 | 5x114.3 | 66.1 | 40 |
| 2017 | 5x114.3 | 66.1 | 40 |
| 2019 | 5x114.3 | 66.1 | 40-50 |
| 2020 | 5x114.3 | 66.1 | 40-50 |
| 2021 | 5x114.3 | 66.1 | 40-50 |
| 2022 | 5x114.3 | 66.1 | 40-50 |
| 2023 | 5x114.3 | 66.1 | 40-50 |
| 2024 | 5x114.3 | 66.1 | 40-50 |
| ▸ 2025 | 5x114.3 | 66.1 | 35-45 |
| 2026 | 5x114.3 | 66.1 | 35-45 |
2025 INFINITI QX50 Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2025 INFINITI QX50, donor rims must match the 5x114.3 PCD and have a center bore of at least 66.1 mm:
DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 66.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2008 Hyundai Santa Fe | 66.1 mm (Exact) | 41 | N 12x1.50 (Cone) |
| 2016 Hyundai Tucson | 66.1 mm (Exact) | 51 | N 12x1.50 (Cone) |
| 2015 INFINITI Q40 | 66.1 mm (Exact) | 40 | N 12x1.25 (Cone) |
| 2024 INFINITI Q50 | 66.1 mm (Exact) | 40-50 | 12x1.25 (Cone) |
| 2022 INFINITI Q60 | 66.1 mm (Exact) | 40-50 | 12x1.25 (Cone) |
| 2019 INFINITI Q70 | 66.1 mm (Exact) | 40-50 | 12x1.25 (Cone) |
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2013 Hyundai Accent | 67.1 mm | 67.1mm → 66.1mm |
35-50 |
| 2017 Hyundai Azera | 67.1 mm | 67.1mm → 66.1mm |
35-50 |
| 2008 Hyundai Elantra | 67.1 mm | 67.1mm → 66.1mm |
35-50 |
| 2020 Hyundai Elantra GT | 67.1 mm | 67.1mm → 66.1mm |
35-50 |
| 2025 Hyundai Elantra Hybrid | 67.1 mm | 67.1mm → 66.1mm |
35-50 |
| 2025 Hyundai Elantra N | 67.1 mm | 67.1mm → 66.1mm |
55 |
Quick Tips & Safety Warnings
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2025 INFINITI QX50 — Frequently Asked Questions
What is the bolt pattern for a 2025 INFINITI QX50?
The 2025 INFINITI QX50 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 35-45mm.
What other years of INFINITI QX50 have the same bolt pattern as the 2025?
The INFINITI QX50 uses the 5x114.3 pattern from 2014 through 2026. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.
What is the factory wheel offset for a 2025 INFINITI QX50?
The OEM offset for the 2025 QX50 is typically around 35-45mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What lug nut size does the 2025 INFINITI QX50 use?
The 2025 INFINITI QX50 uses 12x1.25 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
How do I measure the bolt pattern on my 2025 INFINITI?
The 2025 QX50 uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Can I put aftermarket wheels on my 2025 INFINITI QX50?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 35-45mm, and a center bore of at least 66.1mm (using hub rings if larger).
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →