2026 INFINITI QX50 Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 INFINITI QX50 is 5x114.3 (5x4.5"). It has a center bore of 66.1 mm, an offset range of 35-45, and utilizes 12x1.25 (Flat seat, 21mm hex) fasteners tightened to 80 ft-lbs (108 Nm).
2026 INFINITI QX50 Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 66.1 mm |
| Offset Range (ET) | 35-45 |
| Thread Size (Lug Nut / Bolt) | 12x1.25 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2026 QX50 — Year-Specific Fitment Context
The 2026 model year is the final year of the INFINITI QX50's 5x114.3 bolt pattern run (since 2014). Wheels from any 2014–2026 INFINITI QX50 are cross-compatible with the 2026 model.
INFINITI QX50 Bolt Pattern by Year
Looking for all generations? View the complete INFINITI QX50 (2014–2026) Bolt Pattern & Generation Guide →
The table below shows how the QX50's wheel specifications have changed over the years. The 2026 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2014 | 5x114.3 | 66.1 | 40 |
| 2015 | 5x114.3 | 66.1 | 40 |
| 2016 | 5x114.3 | 66.1 | 40 |
| 2017 | 5x114.3 | 66.1 | 40 |
| 2019 | 5x114.3 | 66.1 | 40-50 |
| 2020 | 5x114.3 | 66.1 | 40-50 |
| 2021 | 5x114.3 | 66.1 | 40-50 |
| 2022 | 5x114.3 | 66.1 | 40-50 |
| 2023 | 5x114.3 | 66.1 | 40-50 |
| 2024 | 5x114.3 | 66.1 | 40-50 |
| 2025 | 5x114.3 | 66.1 | 35-45 |
| ▸ 2026 | 5x114.3 | 66.1 | 35-45 |
2026 INFINITI QX50 Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2026 INFINITI QX50, donor rims must match the 5x114.3 PCD and have a center bore of at least 66.1 mm:
DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 66.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2017 Nissan Quest | 66.1 mm (Exact) | 50 | N 12x1.25 (Cone) |
| 2025 Nissan Rogue | 66.1 mm (Exact) | 35-45 | 12x1.25 (Flat) |
| 2015 Nissan Rogue Select | 66.1 mm (Exact) | 40 | 12x1.25 (Cone) |
| 2023 Nissan Rogue Sport | 66.1 mm (Exact) | 40 | 12x1.25 (Cone) |
| 2013 Nissan Sentra | 66.1 mm (Exact) | 40 | 12x1.25 (Cone) |
| 2025 Nissan Z | 66.1 mm (Exact) | 20-35mm | M12x1.25 (Cone) |
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2003 Pontiac Grand Prix | 70.3 mm | 70.3mm → 66.1mm |
52 |
| 2002 Toyota 4Runner | 106.1 mm | 106.1mm → 66.1mm |
12 |
| 2024 Aston Martin DB11 | 67.1 mm | 67.1mm → 66.1mm |
35-45mm |
| 2015 Aston Martin DB9 | 68.1 mm | 68.1mm → 66.1mm |
35-45mm |
| 2016 Aston Martin DB9 GT | 68.1 mm | 68.1mm → 66.1mm |
35-45mm |
| 2021 Aston Martin DBS Superleggera | 68.1 mm | 68.1mm → 66.1mm |
35-45mm |
Quick Tips & Safety Warnings
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 INFINITI QX50 — Frequently Asked Questions
What is the bolt pattern for a 2026 INFINITI QX50?
The 2026 INFINITI QX50 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 35-45mm.
What other years of INFINITI QX50 have the same bolt pattern as the 2026?
The INFINITI QX50 uses the 5x114.3 pattern from 2014 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2026 INFINITI QX50?
Refer to your owner's manual for exact specs, but always tighten the 12x1.25 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What lug nut size does the 2026 INFINITI QX50 use?
The 2026 INFINITI QX50 uses 12x1.25 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Will wheels from another INFINITI fit my 2026 QX50?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 66.1mm.
What is the factory wheel offset for a 2026 INFINITI QX50?
The OEM offset for the 2026 QX50 is typically around 35-45mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →