2015 INFINITI QX50 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2015 INFINITI QX50, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2015 QX50 — Year-Specific Fitment Context
The 2015 INFINITI QX50 is in year 2 of 11 using the 5x114.3 pattern (2014–2024). Wheels from any 2014–2024 INFINITI QX50 are cross-compatible with the 2015 model.
INFINITI QX50 Bolt Pattern by Year
The table below shows how the QX50's wheel specifications have changed over the years. The 2015 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2015 INFINITI QX50
For your 2015 INFINITI QX50, the 5x114.3 bolt pattern is shared across 2014–2024 models, ensuring cross-compatibility. Critical to fitment is the 66.1mm center bore; aftermarket wheels with larger bores require hub-centric rings to prevent vibration and ensure load is on the hub, not the lugs. Offset is sensitive: the factory 40mm offset maintains proper suspension geometry and clearance. Deviating more than ±5mm may cause rubbing or handling issues. Always use lug nuts with the correct thread pitch (12x1.25) and seat type (conical 60-degree) to avoid wheel loosening. Never use ball-seat lug nuts on conical-seat wheels.
Historical Fitment Data Reference
In our dataset, INFINITI QX50 appears from 2014 to 2024 (10 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 90.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50 miles of driving to ensure proper seating.
- ✅ When using aftermarket wheels, verify that the wheel hub bore is at least 66.1mm; use hub-centric rings if larger.
- ✅ Avoid spacers unless necessary; if used, ensure they are hub-centric and do not alter offset beyond safe limits.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2015 INFINITI QX50 — Frequently Asked Questions
What is the bolt pattern for a 2015 INFINITI QX50?
The 2015 INFINITI QX50 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 40mm.
What other years of INFINITI QX50 have the same bolt pattern as the 2015?
The INFINITI QX50 uses the 5x114.3 pattern from 2014 through 2024. Wheels from any of these model years are dimensionally compatible with the 2015, provided the offset and center bore also match.
What is the center bore of a 2015 INFINITI QX50?
The factory center bore (hub bore) for the 2015 INFINITI QX50 is 66.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
How tight should I torque the lug nuts on a 2015 INFINITI QX50?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.25 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
How do I measure the bolt pattern on my 2015 INFINITI?
The 2015 QX50 uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Can I put aftermarket wheels on my 2015 INFINITI QX50?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 40mm, and a center bore of at least 66.1mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset