2014 INFINITI QX50 Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2014 INFINITI QX50 is 5x114.3 (5x4.5"). It has a center bore of 66.1 mm, an offset range of 40, and utilizes N 12x1.25 (Cone seat, 21mm hex) fasteners tightened to 80 ft-lbs (108 Nm).
2014 INFINITI QX50 Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 66.1 mm |
| Offset Range (ET) | 40 |
| Thread Size (Lug Nut / Bolt) | N 12x1.25 |
| Fastener Seat Type | Conical 60° (Cone / Tapered) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2014 QX50 — Year-Specific Fitment Context
The 2014 model year marks the beginning of the INFINITI QX50's 5x114.3 bolt pattern era, which continued through 2025 (12 consecutive years). Wheels from any 2014–2025 INFINITI QX50 are cross-compatible with the 2014 model.
INFINITI QX50 Bolt Pattern by Year
The table below shows how the QX50's wheel specifications have changed over the years. The 2014 model year is highlighted.
2014 INFINITI QX50 Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3165 vehicles in our database (very common). For safe wheel swaps on the 2014 INFINITI QX50, donor rims must match the 5x114.3 PCD and have a center bore of at least 66.1 mm:
DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 66.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2015 Chevrolet City Express | 66.1 mm (Exact) | 44 | N 12x1.25 (Cone) |
| 2014 Chevrolet SS | 66.1 mm (Exact) | 44 | N 12x1.25 (Cone) |
| 2024 Fisker Ocean | 66.1 mm (Exact) | 40 | 14x1.5 (Cone) |
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2018 Aston Martin DB11 | 68.1 mm | 68.1mm → 66.1mm |
35-45mm |
| 2005 Aston Martin DB9 | 68.1 mm | 68.1mm → 66.1mm |
50 |
| 2016 Aston Martin DB9 GT | 68.1 mm | 68.1mm → 66.1mm |
35-45mm |
| 2008 Aston Martin DBS | 68.1 mm | 68.1mm → 66.1mm |
42 |
| 2019 Aston Martin DBS Superleggera | 68.1 mm | 68.1mm → 66.1mm |
35-45mm |
| 2021 Aston Martin DBX | 68.1 mm | 68.1mm → 66.1mm |
35-45mm |
Expert Buying Guide for 2014 INFINITI QX50
For your 2014 INFINITI QX50, the bolt pattern is 5x114.3 with a center bore of 66.1mm. When selecting aftermarket wheels, ensure they have a bore larger than 66.1mm and use hub-centric rings to prevent vibrations and ensure proper load distribution. The offset is critical; the factory offset is 40mm. Sticking within ±5mm is recommended to avoid rubbing or clearance issues. Always verify lug nut thread pitch (12x1.25) and seat type—use conical (60-degree) or ball seat lug nuts as specified by the wheel manufacturer. Improper lug nuts can lead to wheel loosening. Re-torque after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, INFINITI QX50 appears from 2014 to 2025 (11 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 90.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles of driving.
- ✅ If using aftermarket wheels, always install hub-centric rings (66.1mm to wheel bore).
- ✅ Avoid spacers; if necessary, use hub-centric spacers and longer studs to maintain safety.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
2014 INFINITI QX50 — Frequently Asked Questions
What is the bolt pattern for a 2014 INFINITI QX50?
The 2014 INFINITI QX50 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 40mm.
What other years of INFINITI QX50 have the same bolt pattern as the 2014?
The INFINITI QX50 uses the 5x114.3 pattern from 2014 through 2025. Wheels from any of these model years are dimensionally compatible with the 2014, provided the offset and center bore also match.
What is the factory wheel offset for a 2014 INFINITI QX50?
The OEM offset for the 2014 QX50 is typically around 40mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Can I put aftermarket wheels on my 2014 INFINITI QX50?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 40mm, and a center bore of at least 66.1mm (using hub rings if larger).
What is the center bore of a 2014 INFINITI QX50?
The factory center bore (hub bore) for the 2014 INFINITI QX50 is 66.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Can I use spacers on my 2014 INFINITI QX50?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 66.1mm center bore. Also verify that you have enough thread engagement for your N 12x1.25 hardware.
Need Full Fitment Data in Bulk?
Stop scraping or looking up cars one by one. Import 12,400+ verified vehicle specs (1992–2025) directly into your Shopify store, inventory system, or custom automotive software.
Explore Master Database (CSV) →