2020 INFINITI QX50 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2020 INFINITI QX50, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 40-50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2020 QX50 — Year-Specific Fitment Context
The 2020 INFINITI QX50 is in year 7 of 11 using the 5x114.3 pattern (2014–2024). Wheels from any 2014–2024 INFINITI QX50 are cross-compatible with the 2020 model.
INFINITI QX50 Bolt Pattern by Year
The table below shows how the QX50's wheel specifications have changed over the years. The 2020 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2020 INFINITI QX50
For your 2020 INFINITI QX50, the critical center bore is 66.1mm. Aftermarket wheels often have a larger bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. Offset must stay within 40-50mm; deviating risks rubbing suspension components or fenders. Always verify lug nut thread pitch (12x1.25) and seat type—factory uses conical (60-degree) seats. Using incorrect lug nuts (e.g., ball seat) can cause wheel loosening. Cross-compatible wheels from 2014–2024 QX50 models share the same 5x114.3 bolt pattern, but always confirm offset and bore.
Historical Fitment Data Reference
In our dataset, INFINITI QX50 appears from 2014 to 2024 (10 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 90.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid wheels with offset below 40mm; they may contact the brake calipers or strut assembly.
- ✅ When installing hub-centric rings, use aluminum or plastic rings that match the 66.1mm hub diameter precisely.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2020 INFINITI QX50 — Frequently Asked Questions
What is the bolt pattern for a 2020 INFINITI QX50?
The 2020 INFINITI QX50 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 40-50mm.
What other years of INFINITI QX50 have the same bolt pattern as the 2020?
The INFINITI QX50 uses the 5x114.3 pattern from 2014 through 2024. Wheels from any of these model years are dimensionally compatible with the 2020, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2020 INFINITI QX50?
Refer to your owner's manual for exact specs, but always tighten the 12x1.25 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the factory wheel offset for a 2020 INFINITI QX50?
The OEM offset for the 2020 QX50 is typically around 40-50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Do 2020 INFINITI QX50s use lug bolts or lug nuts?
The 2020 QX50 requires 12x1.25 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What does 40-50mm offset mean for the 2020 QX50?
An offset of 40-50mm means the wheel's mounting surface is 40-50mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your INFINITI.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset