2026 Hyundai IONIQ 6 Bolt Pattern

Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Hyundai IONIQ 6 is 5x114.3 (5x4.5"). It has a center bore of 67.1 mm, an offset range of 45-50, and utilizes 12x1.5 (Flat seat, 21mm hex) fasteners tightened to 79 ft-lbs (107 Nm).

2026 Hyundai IONIQ 6 Wheel Fitment Specs

Bolt Pattern (Lug Pattern) 5x114.3 (5x4.5")
Center Bore (Hub Bore) 67.1 mm
Offset Range (ET) 45-50
Thread Size (Lug Nut / Bolt) 12x1.5
Fastener Seat Type Flat / Mag Seat (Washer)
Lug Wrench / Socket Hex Size 21mm
Wheel Torque Specs 79 ft-lbs (107 Nm)
💡

Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.

🛠️ Managing a shop, wheel inventory, or app? Stop searching one by one.
Download 12,902 Vehicle Database (CSV) →
🔍 Check fitment for other vehicles using our Ultimate Bolt Pattern Finder tool →

2026 IONIQ 6 — Year-Specific Fitment Context

The 2026 model year is the final year of the Hyundai IONIQ 6's 5x114.3 bolt pattern run (since 2024). Wheels from any 2024–2026 Hyundai IONIQ 6 are cross-compatible with the 2026 model.

Hyundai IONIQ 6 Bolt Pattern by Year

Looking for all generations? View the complete Hyundai IONIQ 6 (2024–2026) Bolt Pattern & Generation Guide →

The table below shows how the IONIQ 6's wheel specifications have changed over the years. The 2026 model year is highlighted.

Year Bolt Pattern Center Bore Offset
2024 5x114.3 67.1 35-50
2025 5x114.3 67.1 45-50
▸ 2026 5x114.3 67.1 45-50

2026 Hyundai IONIQ 6 Wheel Interchange & Donor Fitment Guide (5x114.3)

The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2026 Hyundai IONIQ 6, donor rims must match the 5x114.3 PCD and have a center bore of at least 67.1 mm:

DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 67.1mm Center Bore (No Hub Rings Needed)

Compatible Donor Vehicle Center Bore OEM Offset (ET) Lug Thread & Seat
2026 Genesis Electrified G80 67.1 mm (Exact) 35-50 12x1.5 (Ball)
2024 Genesis Electrified GV70 67.1 mm (Exact) 35-50 12x1.5 (Cone)
2025 Genesis G70 67.1 mm (Exact) 34-44 12x1.5 (Ball)
2025 Genesis G80 67.1 mm (Exact) 35-50 12x1.5 (Ball)
2025 Genesis G90 67.1 mm (Exact) 35-45 12x1.5 (Ball)
2025 Genesis Genesis 67.1 mm (Exact) 35-45 12x1.5 (Ball)

HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)

Donor Vehicle Donor Bore Required Hub Ring (OD → ID) OEM Offset (ET)
1997 Jeep Wrangler 71.6 mm 71.6mm → 67.1mm 25
2024 Lincoln Aviator 70.5 mm 70.5mm → 67.1mm 50
1994 Lincoln Continental 70.3 mm 70.3mm → 67.1mm 40
1993 Lincoln Town Car 70.3 mm 70.3mm → 67.1mm 10
2018 Lotus Evora 400 68.1 mm 68.1mm → 67.1mm 52 front, 69 rear
2021 Lotus Evora GT 68.0 mm 68.0mm → 67.1mm 50-60mm
Looking for all models? View the complete directory of vehicles with 5x114.3 bolt pattern →

Quick Tips & Safety Warnings

Ready to upgrade or perform maintenance?

🛒 Shop Tools & Accessories on Amazon

As an Amazon Associate, I earn from qualifying purchases.

2026 Hyundai IONIQ 6 — Frequently Asked Questions

What is the bolt pattern for a 2026 Hyundai IONIQ 6?

The 2026 Hyundai IONIQ 6 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 45-50mm.

What other years of Hyundai IONIQ 6 have the same bolt pattern as the 2026?

The Hyundai IONIQ 6 uses the 5x114.3 pattern from 2024 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.

Why is matching the 67.1mm center bore important for the 2026 IONIQ 6?

The 67.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.

What is the PCD for a 2026 Hyundai IONIQ 6?

PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2026 IONIQ 6, the PCD is 5x114.3.

How tight should I torque the lug nuts on a 2026 Hyundai IONIQ 6?

Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.

What does 45-50mm offset mean for the 2026 IONIQ 6?

An offset of 45-50mm means the wheel's mounting surface is 45-50mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Hyundai.

For Tire & Wheel Shops, Shopify Stores & Developers

Running a Tire Shop or Wheel Store?

Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.

Get Master Spreadsheet (CSV) →
Confidence Level
Medium
Verified Source
Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last Updated
2026-11-18

Hyundai IONIQ 6 By Year

2024 2025 2026

Other Hyundai Models

Accent Elantra N Entourage Equus Genesis Genesis Coupe IONIQ 6 IONIQ 7 Kona Kona Electric NEXO Palisade Santa Fe Santa Fe Sport Sonata Hybrid Tiburon Tucson Tucson Hybrid Veloster XG350

Popular Vehicle Fitment

▶ Ford Mustang Specs ▶ Chevy Tahoe Specs ▶ Honda Civic Specs ▶ Ford F-150 Specs ▶ Toyota Camry Specs

Common Bolt Patterns

▶ 5x114.3 (5x4.5") ▶ 6x139.7 (6x5.5") ▶ 5x120 ▶ 5x127 (5x5") ▶ 5x112 (European)