2024 Hyundai IONIQ 6 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2024 Hyundai IONIQ 6, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 35-50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2024 IONIQ 6 — Year-Specific Fitment Context
The 2024 is the only model year of the Hyundai IONIQ 6 in our database using the 5x114.3 bolt pattern.
Fitment Notes
The 2024 Hyundai IONIQ 6 has a bolt pattern of 5x114.3.
Imperial Conversion: This bolt pattern is commonly referred to as 5x4.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x4.5".
This means it is a 5 lug pattern with a circle diameter of 114.3mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Hyundai IONIQ 6 appears from 2024 to 2024 (1 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 85.0 mm
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
2024 Hyundai IONIQ 6 — Frequently Asked Questions
What is the bolt pattern for a 2024 Hyundai IONIQ 6?
The 2024 Hyundai IONIQ 6 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 35-50mm.
Why is matching the 67.1mm center bore important for the 2024 IONIQ 6?
The 67.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What does 35-50mm offset mean for the 2024 IONIQ 6?
An offset of 35-50mm means the wheel's mounting surface is 35-50mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Hyundai.
What lug nut size does the 2024 Hyundai IONIQ 6 use?
The 2024 Hyundai IONIQ 6 uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Can I use spacers on my 2024 Hyundai IONIQ 6?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your 12x1.5 hardware.
What is the factory wheel offset for a 2024 Hyundai IONIQ 6?
The OEM offset for the 2024 IONIQ 6 is typically around 35-50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Hyundai IONIQ 6 is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2024-2024 (1 model years).
- Observed bolt-pattern variants: 1 (5x114.3).
- Observed total offset span across years: 85.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2024 Hyundai IONIQ 6, please report it via our About page contact so we can verify and update this record.