2025 INFINITI QX55 Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2025 INFINITI QX55 is 5x114.3 (5x4.5"). It has a center bore of 66.1 mm, an offset range of 39-45, and utilizes 12x1.25 (Flat seat, 21mm hex) fasteners tightened to 80 ft-lbs (108 Nm).
2025 INFINITI QX55 Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 66.1 mm |
| Offset Range (ET) | 39-45 |
| Thread Size (Lug Nut / Bolt) | 12x1.25 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2025 QX55 — Year-Specific Fitment Context
The 2025 INFINITI QX55 is in year 4 of 5 using the 5x114.3 pattern (2022–2026). Wheels from any 2022–2026 INFINITI QX55 are cross-compatible with the 2025 model.
INFINITI QX55 Bolt Pattern by Year
Looking for all generations? View the complete INFINITI QX55 (2022–2026) Bolt Pattern & Generation Guide →
The table below shows how the QX55's wheel specifications have changed over the years. The 2025 model year is highlighted.
2025 INFINITI QX55 Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2025 INFINITI QX55, donor rims must match the 5x114.3 PCD and have a center bore of at least 66.1 mm:
DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 66.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2007 Aston Martin Vantage | 66.1 mm (Exact) | 50 | B 14x2.00 (Cone) |
| 2018 Chevrolet City Express | 66.1 mm (Exact) | 44 | N 12x1.25 (Cone) |
| 2017 Chevrolet SS | 66.1 mm (Exact) | 44 | N 12x1.25 (Cone) |
| 2024 Fisker Ocean | 66.1 mm (Exact) | 40 | 14x1.5 (Cone) |
| 2008 Hyundai Santa Fe | 66.1 mm (Exact) | 41 | N 12x1.50 (Cone) |
| 2016 Hyundai Tucson | 66.1 mm (Exact) | 51 | N 12x1.50 (Cone) |
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2024 Aston Martin DB11 | 67.1 mm | 67.1mm → 66.1mm |
35-45mm |
| 2015 Aston Martin DB9 | 68.1 mm | 68.1mm → 66.1mm |
35-45mm |
| 2016 Aston Martin DB9 GT | 68.1 mm | 68.1mm → 66.1mm |
35-45mm |
| 2021 Aston Martin DBS Superleggera | 68.1 mm | 68.1mm → 66.1mm |
35-45mm |
| 2025 Aston Martin DBX | 68.1 mm | 68.1mm → 66.1mm |
35-45mm |
| 2018 Aston Martin Vanquish S | 68.1 mm | 68.1mm → 66.1mm |
35-45mm |
Quick Tips & Safety Warnings
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2025 INFINITI QX55 — Frequently Asked Questions
What is the bolt pattern for a 2025 INFINITI QX55?
The 2025 INFINITI QX55 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 39-45mm.
What other years of INFINITI QX55 have the same bolt pattern as the 2025?
The INFINITI QX55 uses the 5x114.3 pattern from 2022 through 2026. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.
Can I use spacers on my 2025 INFINITI QX55?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 66.1mm center bore. Also verify that you have enough thread engagement for your 12x1.25 hardware.
What is the factory wheel offset for a 2025 INFINITI QX55?
The OEM offset for the 2025 QX55 is typically around 39-45mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What is the center bore of a 2025 INFINITI QX55?
The factory center bore (hub bore) for the 2025 INFINITI QX55 is 66.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
How tight should I torque the lug nuts on a 2025 INFINITI QX55?
Refer to your owner's manual for exact specs, but always tighten the 12x1.25 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →