2023 INFINITI QX55 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2023 INFINITI QX55, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 40-50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2023 QX55 — Year-Specific Fitment Context
The 2023 INFINITI QX55 is in year 2 of 3 using the 5x114.3 pattern (2022–2024). Wheels from any 2022–2024 INFINITI QX55 are cross-compatible with the 2023 model.
INFINITI QX55 Bolt Pattern by Year
The table below shows how the QX55's wheel specifications have changed over the years. The 2023 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2023 INFINITI QX55
When selecting aftermarket wheels for your 2023 INFINITI QX55, the 66.1mm center bore is critical. Most aftermarket wheels have a larger bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibration and ensure proper load distribution. Offset must stay within 40-50mm; deviating can cause rubbing or clearance issues with brakes and suspension. Always use lug nuts with the correct thread pitch (12x1.25) and seat type—conical (60-degree) or ball seat—matching your wheel's design. Improper lug nuts can lead to wheel loosening. For cross-compatibility, wheels from 2022–2024 QX55 models fit directly.
Historical Fitment Data Reference
In our dataset, INFINITI QX55 appears from 2022 to 2024 (3 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 90.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using universal fit wheels without hub-centric rings; they can cause steering wheel shake.
- ✅ Check brake caliper clearance when using offsets near 40mm, as some aftermarket wheels may contact the caliper.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2023 INFINITI QX55 — Frequently Asked Questions
What is the bolt pattern for a 2023 INFINITI QX55?
The 2023 INFINITI QX55 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 40-50mm.
What other years of INFINITI QX55 have the same bolt pattern as the 2023?
The INFINITI QX55 uses the 5x114.3 pattern from 2022 through 2024. Wheels from any of these model years are dimensionally compatible with the 2023, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2023 INFINITI QX55?
Refer to your owner's manual for exact specs, but always tighten the 12x1.25 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Will wheels from another INFINITI fit my 2023 QX55?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 66.1mm.
What lug nut size does the 2023 INFINITI QX55 use?
The 2023 INFINITI QX55 uses 12x1.25 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What does 40-50mm offset mean for the 2023 QX55?
An offset of 40-50mm means the wheel's mounting surface is 40-50mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your INFINITI.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset