2026 INFINITI QX55 Bolt Pattern

Quick Answer: The factory bolt pattern (lug pattern) for a 2026 INFINITI QX55 is 5x114.3 (5x4.5"). It has a center bore of 66.1 mm, an offset range of 39-45, and utilizes 12x1.25 (Flat seat, 21mm hex) fasteners tightened to 80 ft-lbs (108 Nm).

2026 INFINITI QX55 Wheel Fitment Specs

Bolt Pattern (Lug Pattern) 5x114.3 (5x4.5")
Center Bore (Hub Bore) 66.1 mm
Offset Range (ET) 39-45
Thread Size (Lug Nut / Bolt) 12x1.25
Fastener Seat Type Flat / Mag Seat (Washer)
Lug Wrench / Socket Hex Size 21mm
Wheel Torque Specs 80 ft-lbs (108 Nm)
💡

Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.

🛠️ Managing a shop, wheel inventory, or app? Stop searching one by one.
Download 12,902 Vehicle Database (CSV) →
🔍 Check fitment for other vehicles using our Ultimate Bolt Pattern Finder tool →

2026 QX55 — Year-Specific Fitment Context

The 2026 model year is the final year of the INFINITI QX55's 5x114.3 bolt pattern run (since 2022). Wheels from any 2022–2026 INFINITI QX55 are cross-compatible with the 2026 model.

INFINITI QX55 Bolt Pattern by Year

Looking for all generations? View the complete INFINITI QX55 (2022–2026) Bolt Pattern & Generation Guide →

The table below shows how the QX55's wheel specifications have changed over the years. The 2026 model year is highlighted.

Year Bolt Pattern Center Bore Offset
2022 5x114.3 66.1 40-50
2023 5x114.3 66.1 40-50
2024 5x114.3 66.1 40-50
2025 5x114.3 66.1 39-45
▸ 2026 5x114.3 66.1 39-45

2026 INFINITI QX55 Wheel Interchange & Donor Fitment Guide (5x114.3)

The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2026 INFINITI QX55, donor rims must match the 5x114.3 PCD and have a center bore of at least 66.1 mm:

DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 66.1mm Center Bore (No Hub Rings Needed)

Compatible Donor Vehicle Center Bore OEM Offset (ET) Lug Thread & Seat
1996 Nissan 200SX 66.1 mm (Exact) 40 N 12x1.25 (Cone)
1996 Nissan 240SX 66.1 mm (Exact) 40 N 12x1.25 (Cone)
2020 Nissan 370Z 66.1 mm (Exact) 35-45 12x1.25 (Cone)
2022 Nissan 400Z 66.1 mm (Exact) 20-35mm M12x1.25 (Cone)
1999 Nissan Altima 66.1 mm (Exact) 35-45 12x1.25 (Cone)
2023 Nissan Ariya 66.1 mm (Exact) 35-45mm M12x1.25 (Cone)

HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)

Donor Vehicle Donor Bore Required Hub Ring (OD → ID) OEM Offset (ET)
2026 McLaren GTS 67.1 mm 67.1mm → 66.1mm Front: +55mm, Rear: +48mm
1994 Mercury Grand Marquis 70.5 mm 70.5mm → 66.1mm 0-40
2003 Mercury Sable 70.5 mm 70.5mm → 66.1mm 40
2025 Mitsubishi Eclipse Cross 67.1 mm 67.1mm → 66.1mm 40-46
2006 Mitsubishi Galant 67.1 mm 67.1mm → 66.1mm 38-46
2007 Mitsubishi Lancer 67.1 mm 67.1mm → 66.1mm 46
Looking for all models? View the complete directory of vehicles with 5x114.3 bolt pattern →

Quick Tips & Safety Warnings

Ready to upgrade or perform maintenance?

🛒 Shop Tools & Accessories on Amazon

As an Amazon Associate, I earn from qualifying purchases.

2026 INFINITI QX55 — Frequently Asked Questions

What is the bolt pattern for a 2026 INFINITI QX55?

The 2026 INFINITI QX55 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 39-45mm.

What other years of INFINITI QX55 have the same bolt pattern as the 2026?

The INFINITI QX55 uses the 5x114.3 pattern from 2022 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.

How do I measure the bolt pattern on my 2026 INFINITI?

The 2026 QX55 uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.

Can I use spacers on my 2026 INFINITI QX55?

Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 66.1mm center bore. Also verify that you have enough thread engagement for your 12x1.25 hardware.

What does 39-45mm offset mean for the 2026 QX55?

An offset of 39-45mm means the wheel's mounting surface is 39-45mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your INFINITI.

Will wheels from another INFINITI fit my 2026 QX55?

Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 66.1mm.

For Tire & Wheel Shops, Shopify Stores & Developers

Running a Tire Shop or Wheel Store?

Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.

Get Master Spreadsheet (CSV) →
Confidence Level
Medium
Verified Source
Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last Updated
2026-11-18

INFINITI QX55 By Year

2022 2023 2024 2025 2026

Other INFINITI Models

EX FX G I J JX M Q Q40 Q50 Q60 Q70 QX QX30 QX50 QX55 QX60 QX70 QX80

Popular Vehicle Fitment

▶ Ford Mustang Specs ▶ Chevy Tahoe Specs ▶ Honda Civic Specs ▶ Ford F-150 Specs ▶ Toyota Camry Specs

Common Bolt Patterns

▶ 5x114.3 (5x4.5") ▶ 6x139.7 (6x5.5") ▶ 5x120 ▶ 5x127 (5x5") ▶ 5x112 (European)