2025 INFINITI QX60 Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2025 INFINITI QX60 is 5x114.3 (5x4.5"). It has a center bore of 66.1 mm, an offset range of 35-45, and utilizes 12x1.25 (Flat seat, 21mm hex) fasteners tightened to 83 ft-lbs (113 Nm).
2025 INFINITI QX60 Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 66.1 mm |
| Offset Range (ET) | 35-45 |
| Thread Size (Lug Nut / Bolt) | 12x1.25 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 83 ft-lbs (113 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2025 QX60 — Year-Specific Fitment Context
The 2025 INFINITI QX60 is in year 12 of 13 using the 5x114.3 pattern (2014–2026). Wheels from any 2014–2026 INFINITI QX60 are cross-compatible with the 2025 model.
INFINITI QX60 Bolt Pattern by Year
Looking for all generations? View the complete INFINITI QX60 (2014–2026) Bolt Pattern & Generation Guide →
The table below shows how the QX60's wheel specifications have changed over the years. The 2025 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2014 | 5x114.3 | 66.1 | 40-50 |
| 2015 | 5x114.3 | 66.1 | 40-50 |
| 2016 | 5x114.3 | 66.1 | 40-50 |
| 2017 | 5x114.3 | 66.1 | 40-50 |
| 2018 | 5x114.3 | 66.1 | 40-50 |
| 2019 | 5x114.3 | 66.1 | 40-50 |
| 2020 | 5x114.3 | 66.1 | 40-50 |
| 2022 | 5x114.3 | 66.1 | 40-50 |
| 2023 | 5x114.3 | 66.1 | 40-50 |
| 2024 | 5x114.3 | 66.1 | 40-50 |
| ▸ 2025 | 5x114.3 | 66.1 | 35-45 |
| 2026 | 5x114.3 | 66.1 | 35-45 |
2025 INFINITI QX60 Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2025 INFINITI QX60, donor rims must match the 5x114.3 PCD and have a center bore of at least 66.1 mm:
DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 66.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2008 Hyundai Santa Fe | 66.1 mm (Exact) | 41 | N 12x1.50 (Cone) |
| 2016 Hyundai Tucson | 66.1 mm (Exact) | 51 | N 12x1.50 (Cone) |
| 2015 INFINITI Q40 | 66.1 mm (Exact) | 40 | N 12x1.25 (Cone) |
| 2024 INFINITI Q50 | 66.1 mm (Exact) | 40-50 | 12x1.25 (Cone) |
| 2022 INFINITI Q60 | 66.1 mm (Exact) | 40-50 | 12x1.25 (Cone) |
| 2019 INFINITI Q70 | 66.1 mm (Exact) | 40-50 | 12x1.25 (Cone) |
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2013 Hyundai Accent | 67.1 mm | 67.1mm → 66.1mm |
35-50 |
| 2017 Hyundai Azera | 67.1 mm | 67.1mm → 66.1mm |
35-50 |
| 2008 Hyundai Elantra | 67.1 mm | 67.1mm → 66.1mm |
35-50 |
| 2020 Hyundai Elantra GT | 67.1 mm | 67.1mm → 66.1mm |
35-50 |
| 2025 Hyundai Elantra Hybrid | 67.1 mm | 67.1mm → 66.1mm |
35-50 |
| 2025 Hyundai Elantra N | 67.1 mm | 67.1mm → 66.1mm |
55 |
Quick Tips & Safety Warnings
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 83 ft-lbs (113 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2025 INFINITI QX60 — Frequently Asked Questions
What is the bolt pattern for a 2025 INFINITI QX60?
The 2025 INFINITI QX60 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 35-45mm.
What other years of INFINITI QX60 have the same bolt pattern as the 2025?
The INFINITI QX60 uses the 5x114.3 pattern from 2014 through 2026. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2025 INFINITI QX60?
Refer to your owner's manual for exact specs, but always tighten the 12x1.25 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the center bore of a 2025 INFINITI QX60?
The factory center bore (hub bore) for the 2025 INFINITI QX60 is 66.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What lug nut size does the 2025 INFINITI QX60 use?
The 2025 INFINITI QX60 uses 12x1.25 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Why is matching the 66.1mm center bore important for the 2025 QX60?
The 66.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →