2020 INFINITI QX60 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2020 INFINITI QX60, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 40-50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2020 QX60 — Year-Specific Fitment Context
The 2020 INFINITI QX60 is in year 7 of 11 using the 5x114.3 pattern (2014–2024). Wheels from any 2014–2024 INFINITI QX60 are cross-compatible with the 2020 model.
INFINITI QX60 Bolt Pattern by Year
The table below shows how the QX60's wheel specifications have changed over the years. The 2020 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2020 INFINITI QX60
When selecting aftermarket wheels for your 2020 INFINITI QX60, the 66.1mm center bore is critical. Most aftermarket wheels have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load distribution. The offset range is tight: 40-50mm. Straying outside this can cause rubbing or clearance issues with suspension and brakes. Always use lug nuts with the correct thread pitch (12x1.25) and seat type—factory wheels use a conical (60-degree) seat; aftermarket wheels may require ball or conical seats. Never mix seat types, as improper engagement can lead to wheel loss. Verify all specs before installation.
Historical Fitment Data Reference
In our dataset, INFINITI QX60 appears from 2014 to 2024 (10 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 90.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to account for settling.
- ✅ Avoid using universal lug nuts; always match the seat type (conical or ball) to the wheel.
- ✅ Check brake caliper clearance with the new wheel's inner barrel profile, especially if offset is near 40mm.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2020 INFINITI QX60 — Frequently Asked Questions
What is the bolt pattern for a 2020 INFINITI QX60?
The 2020 INFINITI QX60 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 40-50mm.
What other years of INFINITI QX60 have the same bolt pattern as the 2020?
The INFINITI QX60 uses the 5x114.3 pattern from 2014 through 2024. Wheels from any of these model years are dimensionally compatible with the 2020, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2020 INFINITI?
The 2020 QX60 uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Can I use spacers on my 2020 INFINITI QX60?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 66.1mm center bore. Also verify that you have enough thread engagement for your 12x1.25 hardware.
Why is matching the 66.1mm center bore important for the 2020 QX60?
The 66.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What does 40-50mm offset mean for the 2020 QX60?
An offset of 40-50mm means the wheel's mounting surface is 40-50mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your INFINITI.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset