2019 INFINITI QX60 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2019 INFINITI QX60, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 40-50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2019 QX60 — Year-Specific Fitment Context
The 2019 INFINITI QX60 is in year 6 of 11 using the 5x114.3 pattern (2014–2024). Wheels from any 2014–2024 INFINITI QX60 are cross-compatible with the 2019 model.
INFINITI QX60 Bolt Pattern by Year
The table below shows how the QX60's wheel specifications have changed over the years. The 2019 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2019 INFINITI QX60
When selecting aftermarket wheels for your 2019 INFINITI QX60, the 66.1mm center bore is critical. Most aftermarket wheels have a larger bore, requiring hub-centric rings to prevent vibrations and ensure proper load distribution. The offset range is tight: 40-50mm. Sticking to this range maintains suspension geometry and prevents rubbing. Always use lug nuts with the correct thread pitch (12x1.25) and seat type—factory wheels use a conical (60-degree) seat. Using incorrect lug nuts can cause wheel loosening or damage. Verify that aftermarket wheels are hub-centric or use rings, and confirm offset compatibility before purchase.
Historical Fitment Data Reference
In our dataset, INFINITI QX60 appears from 2014 to 2024 (10 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 90.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid wheels with offset below 40mm, as they may rub suspension components.
- ✅ Use only conical seat lug nuts; ball seat or shank-style nuts are incompatible.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2019 INFINITI QX60 — Frequently Asked Questions
What is the bolt pattern for a 2019 INFINITI QX60?
The 2019 INFINITI QX60 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 40-50mm.
What other years of INFINITI QX60 have the same bolt pattern as the 2019?
The INFINITI QX60 uses the 5x114.3 pattern from 2014 through 2024. Wheels from any of these model years are dimensionally compatible with the 2019, provided the offset and center bore also match.
What does 40-50mm offset mean for the 2019 QX60?
An offset of 40-50mm means the wheel's mounting surface is 40-50mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your INFINITI.
What is the factory wheel offset for a 2019 INFINITI QX60?
The OEM offset for the 2019 QX60 is typically around 40-50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Do 2019 INFINITI QX60s use lug bolts or lug nuts?
The 2019 QX60 requires 12x1.25 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the center bore of a 2019 INFINITI QX60?
The factory center bore (hub bore) for the 2019 INFINITI QX60 is 66.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset