2018 INFINITI QX60 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2018 INFINITI QX60, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 40-50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2018 QX60 — Year-Specific Fitment Context
The 2018 INFINITI QX60 is in year 5 of 11 using the 5x114.3 pattern (2014–2024). Wheels from any 2014–2024 INFINITI QX60 are cross-compatible with the 2018 model.
INFINITI QX60 Bolt Pattern by Year
The table below shows how the QX60's wheel specifications have changed over the years. The 2018 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2018 INFINITI QX60
When selecting aftermarket wheels for your 2018 INFINITI QX60, the center bore of 66.1mm is critical. Most aftermarket wheels have a larger bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibrations and ensure proper load distribution. The offset range is 40-50mm; staying within this range maintains suspension geometry and prevents rubbing. Always use lug nuts with the correct thread pitch (12x1.25) and seat type—conical (60-degree) or ball seat, matching the wheel's design. Incorrect lug nuts can cause wheel loosening or damage. For safety, verify all specifications before installation.
Historical Fitment Data Reference
In our dataset, INFINITI QX60 appears from 2014 to 2024 (10 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 90.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using universal fitment wheels without hub-centric rings; they can cause steering wheel vibration and premature bearing wear.
- ✅ Check brake caliper clearance when using wheels with lower offset (40mm) or larger diameters, as the QX60's calipers may interfere.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2018 INFINITI QX60 — Frequently Asked Questions
What is the bolt pattern for a 2018 INFINITI QX60?
The 2018 INFINITI QX60 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 40-50mm.
What other years of INFINITI QX60 have the same bolt pattern as the 2018?
The INFINITI QX60 uses the 5x114.3 pattern from 2014 through 2024. Wheels from any of these model years are dimensionally compatible with the 2018, provided the offset and center bore also match.
Will wheels from another INFINITI fit my 2018 QX60?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 66.1mm.
What is the PCD for a 2018 INFINITI QX60?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2018 QX60, the PCD is 5x114.3.
What lug nut size does the 2018 INFINITI QX60 use?
The 2018 INFINITI QX60 uses 12x1.25 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Can I put aftermarket wheels on my 2018 INFINITI QX60?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 40-50mm, and a center bore of at least 66.1mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset