2026 INFINITI QX60 Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 INFINITI QX60 is 5x114.3 (5x4.5"). It has a center bore of 66.1 mm, an offset range of 35-45, and utilizes 12x1.25 (Flat seat, 21mm hex) fasteners tightened to 83 ft-lbs (113 Nm).
2026 INFINITI QX60 Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 66.1 mm |
| Offset Range (ET) | 35-45 |
| Thread Size (Lug Nut / Bolt) | 12x1.25 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 83 ft-lbs (113 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2026 QX60 — Year-Specific Fitment Context
The 2026 model year is the final year of the INFINITI QX60's 5x114.3 bolt pattern run (since 2014). Wheels from any 2014–2026 INFINITI QX60 are cross-compatible with the 2026 model.
INFINITI QX60 Bolt Pattern by Year
Looking for all generations? View the complete INFINITI QX60 (2014–2026) Bolt Pattern & Generation Guide →
The table below shows how the QX60's wheel specifications have changed over the years. The 2026 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2014 | 5x114.3 | 66.1 | 40-50 |
| 2015 | 5x114.3 | 66.1 | 40-50 |
| 2016 | 5x114.3 | 66.1 | 40-50 |
| 2017 | 5x114.3 | 66.1 | 40-50 |
| 2018 | 5x114.3 | 66.1 | 40-50 |
| 2019 | 5x114.3 | 66.1 | 40-50 |
| 2020 | 5x114.3 | 66.1 | 40-50 |
| 2022 | 5x114.3 | 66.1 | 40-50 |
| 2023 | 5x114.3 | 66.1 | 40-50 |
| 2024 | 5x114.3 | 66.1 | 40-50 |
| 2025 | 5x114.3 | 66.1 | 35-45 |
| ▸ 2026 | 5x114.3 | 66.1 | 35-45 |
2026 INFINITI QX60 Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2026 INFINITI QX60, donor rims must match the 5x114.3 PCD and have a center bore of at least 66.1 mm:
DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 66.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 1996 Nissan 200SX | 66.1 mm (Exact) | 40 | N 12x1.25 (Cone) |
| 1996 Nissan 240SX | 66.1 mm (Exact) | 40 | N 12x1.25 (Cone) |
| 2020 Nissan 370Z | 66.1 mm (Exact) | 35-45 | 12x1.25 (Cone) |
| 2022 Nissan 400Z | 66.1 mm (Exact) | 20-35mm | M12x1.25 (Cone) |
| 1999 Nissan Altima | 66.1 mm (Exact) | 35-45 | 12x1.25 (Cone) |
| 2023 Nissan Ariya | 66.1 mm (Exact) | 35-45mm | M12x1.25 (Cone) |
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2026 Kia Sportage Plug-in Hybrid | 67.1 mm | 67.1mm → 66.1mm |
35-50 |
| 2023 Kia Stinger | 67.1 mm | 67.1mm → 66.1mm |
35-50 |
| 2025 Kia Telluride | 67.1 mm | 67.1mm → 66.1mm |
35-45 |
| 2024 Lincoln Aviator | 70.5 mm | 70.5mm → 66.1mm |
50 |
| 1994 Lincoln Continental | 70.3 mm | 70.3mm → 66.1mm |
40 |
| 1993 Lincoln Town Car | 70.3 mm | 70.3mm → 66.1mm |
10 |
Quick Tips & Safety Warnings
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 83 ft-lbs (113 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 INFINITI QX60 — Frequently Asked Questions
What is the bolt pattern for a 2026 INFINITI QX60?
The 2026 INFINITI QX60 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 35-45mm.
What other years of INFINITI QX60 have the same bolt pattern as the 2026?
The INFINITI QX60 uses the 5x114.3 pattern from 2014 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
What is the factory wheel offset for a 2026 INFINITI QX60?
The OEM offset for the 2026 QX60 is typically around 35-45mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What is the center bore of a 2026 INFINITI QX60?
The factory center bore (hub bore) for the 2026 INFINITI QX60 is 66.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
How do I measure the bolt pattern on my 2026 INFINITI?
The 2026 QX60 uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the PCD for a 2026 INFINITI QX60?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2026 QX60, the PCD is 5x114.3.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →