2025 Tesla Model 3 Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2025 Tesla Model 3 is 5x114.3 (5x4.5"). It has a center bore of 64.1 mm, an offset range of 35-45, and utilizes 14x1.5 (Cone seat, 21mm hex) fasteners tightened to 129 ft-lbs (175 Nm).
2025 Tesla Model 3 Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 64.1 mm |
| Offset Range (ET) | 35-45 |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Conical 60° (Cone / Tapered) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 129 ft-lbs (175 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2025 Model 3 — Year-Specific Fitment Context
The 2025 Tesla Model 3 is in year 9 of 10 using the 5x114.3 pattern (2017–2026). Wheels from any 2017–2026 Tesla Model 3 are cross-compatible with the 2025 model.
Tesla Model 3 Bolt Pattern by Year
Looking for all generations? View the complete Tesla Model 3 (2017–2026) Bolt Pattern & Generation Guide →
The table below shows how the Model 3's wheel specifications have changed over the years. The 2025 model year is highlighted.
2025 Tesla Model 3 Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2025 Tesla Model 3, donor rims must match the 5x114.3 PCD and have a center bore of at least 64.1 mm:
DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 64.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2020 Ford Explorer | 64.1 mm (Exact) | 40 | 14x1.5 (Cone) |
| 2005 Honda Accord | 64.1 mm (Exact) | 52 | N 12x1.50 (Ball) |
| 2024 Honda Accord Hybrid | 64.1 mm (Exact) | 45 | 12x1.5 (Ball) |
| 2005 Honda Civic | 64.1 mm (Exact) | 55 | N 12x1.50 (Ball) |
| 2025 Honda Civic Si | 64.1 mm (Exact) | 40 | 12x1.5 (Ball) |
| 2018 Honda Civic Type R | 64.1 mm (Exact) | 45 | 12x1.5 (Ball) |
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2000 Dodge Stratus | 67.1 mm | 67.1mm → 64.1mm |
41 |
| 1999 Dodge Viper | 70.5 mm | 70.5mm → 64.1mm |
50 front, 70 rear |
| 2025 Ferrari 12Cilindri | 67.1 mm | 67.1mm → 64.1mm |
Not Applicable |
| 2025 Ferrari 296 | 67.1 mm | 67.1mm → 64.1mm |
Not Applicable |
| 2022 Ferrari 296 GTB | 67.1 mm | 67.1mm → 64.1mm |
45 |
| 2015 Ferrari 458 Italia | 67.1 mm | 67.1mm → 64.1mm |
45 front, 58 rear |
Quick Tips & Safety Warnings
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 129 ft-lbs (175 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2025 Tesla Model 3 — Frequently Asked Questions
What is the bolt pattern for a 2025 Tesla Model 3?
The 2025 Tesla Model 3 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 64.1mm and the offset is 35-45mm.
What other years of Tesla Model 3 have the same bolt pattern as the 2025?
The Tesla Model 3 uses the 5x114.3 pattern from 2017 through 2026. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2025 Tesla?
The 2025 Model 3 uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Can I put aftermarket wheels on my 2025 Tesla Model 3?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 35-45mm, and a center bore of at least 64.1mm (using hub rings if larger).
What does 35-45mm offset mean for the 2025 Model 3?
An offset of 35-45mm means the wheel's mounting surface is 35-45mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Tesla.
Do 2025 Tesla Model 3s use lug bolts or lug nuts?
The 2025 Model 3 requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →