2021 Tesla Model 3 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2021 Tesla Model 3, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 64.1 mm |
| Offset (ET) | 40 |
| Torque Specs | 100 ft-lbs (135 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2021 Model 3 — Year-Specific Fitment Context
The 2021 Tesla Model 3 is in year 4 of 7 using the 5x114.3 pattern (2018–2024). Wheels from any 2018–2024 Tesla Model 3 are cross-compatible with the 2021 model. Across its full production run (2017–2024), the Model 3 has also used: 5x120.
Tesla Model 3 Bolt Pattern by Year
The table below shows how the Model 3's wheel specifications have changed over the years. The 2021 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2021 Tesla Model 3
For your 2021 Tesla Model 3, the correct bolt pattern is 5x114.3 with a center bore of 64.1mm. When selecting aftermarket wheels, ensure they have a center bore of at least 64.1mm; if larger, use hub-centric rings to prevent vibrations and ensure proper load distribution. The factory offset is 40mm; deviations beyond ±5mm may cause rubbing or clearance issues with suspension and brakes. Always use lug nuts with the correct thread pitch (14x1.5) and seat type—Tesla uses a conical (60-degree) seat. Never use ball-seat lug nuts, as they can loosen and cause wheel detachment. Re-torque after 50 miles of driving.
Historical Fitment Data Reference
In our dataset, Tesla Model 3 appears from 2017 to 2024 (8 model years). Across model years, this model appears with 2 bolt patterns (5x114.3, 5x120).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 129 lb-ft (175 Nm) after 50 miles of driving, then periodically check.
- ✅ Avoid using aftermarket wheels with a center bore smaller than 64.1mm; they will not fit without machining.
- ✅ If lowering the vehicle, verify offset carefully to prevent tire rubbing against the fender liner.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2021 Tesla Model 3 — Frequently Asked Questions
What is the bolt pattern for a 2021 Tesla Model 3?
The 2021 Tesla Model 3 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 64.1mm and the offset is 40mm.
What other years of Tesla Model 3 have the same bolt pattern as the 2021?
The Tesla Model 3 uses the 5x114.3 pattern from 2018 through 2024. Wheels from any of these model years are dimensionally compatible with the 2021, provided the offset and center bore also match.
What is the factory wheel offset for a 2021 Tesla Model 3?
The OEM offset for the 2021 Model 3 is typically around 40mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How tight should I torque the lug nuts on a 2021 Tesla Model 3?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Will wheels from another Tesla fit my 2021 Model 3?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 64.1mm.
Can I put aftermarket wheels on my 2021 Tesla Model 3?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 40mm, and a center bore of at least 64.1mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset