1994 Honda Passport Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1994 Honda Passport, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 64.1 mm |
| Offset (ET) | 45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
1994 Passport — Year-Specific Fitment Context
The 1994 model year marks the beginning of the Honda Passport's 5x114.3 bolt pattern era, which continued through 2002 (9 consecutive years). Wheels from any 1994–2002 Honda Passport are cross-compatible with the 1994 model. Across its full production run (1994–2024), the Passport has also used: 5x120.
Honda Passport Bolt Pattern by Year
The table below shows how the Passport's wheel specifications have changed over the years. The 1994 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| ▸ 1994 | 5x114.3 | 64.1 | 45 |
| 1995 | 5x114.3 | 64.1 | 45 |
| 1996 | 5x114.3 | 64.1 | 45 |
| 1997 | 5x114.3 | 64.1 | 45 |
| 1998 | 5x114.3 | 64.1 | 45 |
| 1999 | 5x114.3 | 64.1 | 45 |
| 2000 | 5x114.3 | 64.1 | 45 |
| 2001 | 5x114.3 | 64.1 | 45 |
| 2002 | 5x114.3 | 64.1 | 45 |
| 2019 | 5x120 | 64.1 | 55 |
| 2020 | 5x120 | 64.1 | 55 |
| 2021 | 5x120 | 64.1 | 55 |
| 2022 | 5x120 | 64.1 | 55 |
| 2023 | 5x120 | 64.1 | 55 |
| 2024 | 5x120 | 64.1 | 55 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 1994 Honda Passport
For your 1994 Honda Passport, the 5x114.3 bolt pattern is shared with 1994-2002 models, ensuring cross-compatibility. The 64.1mm center bore is critical: aftermarket wheels with larger bores require hub-centric rings to prevent vibration and ensure proper load transfer. Offset is sensitive; the factory 45mm offset maintains suspension geometry and brake clearance. Deviations may cause rubbing or handling issues. Always use 12x1.5 lug nuts with the correct seat (cone or ball) matching your wheels. Improper seating can lead to wheel loosening. Re-torque after 50-100 miles. Avoid wheels from 5x120 models without adapters.
Historical Fitment Data Reference
In our dataset, Honda Passport appears from 1994 to 2024 (15 model years). Across model years, this model appears with 2 bolt patterns (5x114.3, 5x120).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 10.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles of driving.
- ✅ Use hub-centric rings if aftermarket wheels have a bore larger than 64.1mm.
- ✅ Verify offset stays within 35-55mm to avoid rubbing or brake clearance issues.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1994 Honda Passport — Frequently Asked Questions
What is the bolt pattern for a 1994 Honda Passport?
The 1994 Honda Passport uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 64.1mm and the offset is 45mm.
What other years of Honda Passport have the same bolt pattern as the 1994?
The Honda Passport uses the 5x114.3 pattern from 1994 through 2002. Wheels from any of these model years are dimensionally compatible with the 1994, provided the offset and center bore also match.
Can I use spacers on my 1994 Honda Passport?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 64.1mm center bore. Also verify that you have enough thread engagement for your 12x1.5 hardware.
Do 1994 Honda Passports use lug bolts or lug nuts?
The 1994 Passport requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Why is matching the 64.1mm center bore important for the 1994 Passport?
The 64.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the factory wheel offset for a 1994 Honda Passport?
The OEM offset for the 1994 Passport is typically around 45mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset