2018 BMW X5 M Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2018 BMW X5 M, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x120 |
|---|---|
| Lug Nut / Bolt Size | 14x1.25 |
| Center Bore (CB) | 72.56 mm |
| Offset (ET) | 30-40 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2018 X5 M — Year-Specific Fitment Context
The 2018 model year is the final year of the BMW X5 M's 5x120 bolt pattern run (since 2010). Wheels from any 2010–2018 BMW X5 M are cross-compatible with the 2018 model. Across its full production run (2010–2024), the X5 M has also used: 5x112.
BMW X5 M Bolt Pattern by Year
The table below shows how the X5 M's wheel specifications have changed over the years. The 2018 model year is highlighted.
Fitment Notes
The 2018 BMW X5 M has a bolt pattern of 5x120.
This means it is a 5 lug pattern with a circle diameter of 120mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, BMW X5 M appears from 2010 to 2024 (12 model years).
Across model years, this model appears with 2 bolt patterns (5x112, 5x120).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 3
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 86.0 mm
5x120 Pattern Context
This bolt pattern appears on 633 vehicles in our current database and is considered common.
Examples of other vehicles using 5x120:
2018 BMW X5 M — Frequently Asked Questions
What is the bolt pattern for a 2018 BMW X5 M?
The 2018 BMW X5 M uses a 5x120 bolt pattern (also called lug pattern or PCD). The center bore is 72.56mm and the offset is 30-40mm.
What other years of BMW X5 M have the same bolt pattern as the 2018?
The BMW X5 M uses the 5x120 pattern from 2010 through 2018. Wheels from any of these model years are dimensionally compatible with the 2018, provided the offset and center bore also match.
What is the PCD for a 2018 BMW X5 M?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2018 X5 M, the PCD is 5x120.
How tight should I torque the lug nuts on a 2018 BMW X5 M?
Refer to your owner's manual for exact specs, but always tighten the 14x1.25 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What does 30-40mm offset mean for the 2018 X5 M?
An offset of 30-40mm means the wheel's mounting surface is 30-40mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your BMW.
Can I put aftermarket wheels on my 2018 BMW X5 M?
Absolutely. Just ensure the aftermarket wheels have a 5x120 bolt pattern, an offset near 30-40mm, and a center bore of at least 72.56mm (using hub rings if larger).
Fitment Checklist Before You Buy Wheels
- Confirm bolt pattern carefully. 5x120 is often confused with other common 5-lug patterns.
- This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Editorial Fitment Notes
BMW X5 M has multiple wheel-fitment records across generations, so matching exact year and trim is important before ordering wheels.
- Observed production years in our database: 2010-2024 (12 model years).
- Observed bolt-pattern variants: 2 (5x112, 5x120).
- Observed total offset span across years: 86.0 mm.
- Observed center-bore variants: 3 | lug-size variants: 2.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2018 BMW X5 M, please report it via our About page contact so we can verify and update this record.