2001 Acura MDX Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2001 Acura MDX, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 64.1 mm |
| Offset (ET) | 45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2001 MDX — Year-Specific Fitment Context
The 2001 model year marks the beginning of the Acura MDX's 5x114.3 bolt pattern era, which continued through 2016 (16 consecutive years). Wheels from any 2001–2016 Acura MDX are cross-compatible with the 2001 model. Across its full production run (2001–2024), the MDX has also used: 5x120.
Acura MDX Bolt Pattern by Year
The table below shows how the MDX's wheel specifications have changed over the years. The 2001 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| ▸ 2001 | 5x114.3 | 64.1 | 45 |
| 2002 | 5x114.3 | 64.1 | 45 |
| 2003 | 5x114.3 | 64.1 | 45 |
| 2004 | 5x114.3 | 64.1 | 45 |
| 2005 | 5x114.3 | 64.1 | 45 |
| 2006 | 5x114.3 | 64.1 | 45 |
| 2007 | 5x120 | 64.1 | 45 |
| 2008 | 5x120 | 64.1 | 45 |
| 2009 | 5x120 | 64.1 | 45 |
| 2010 | 5x120 | 64.1 | 45 |
| 2011 | 5x120 | 64.1 | 45 |
| 2012 | 5x120 | 64.1 | 45 |
| 2013 | 5x120 | 64.1 | 45 |
| 2014 | 5x114.3 | 64.1 | 45 |
| 2015 | 5x114.3 | 64.1 | 45 |
| 2016 | 5x114.3 | 64.1 | 45 |
| 2017 | 5x120 | 64.1 | 55 |
| 2018 | 5x120 | 64.1 | 55 |
| 2019 | 5x120 | 64.1 | 55 |
| 2020 | 5x120 | 64.1 | 55 |
| 2022 | 5x120 | 64.1 | 55 |
| 2023 | 5x120 | 64.1 | 55 |
| 2024 | 5x120 | 64.1 | 55 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2001 Acura MDX
The 2001 Acura MDX uses a 5x114.3 bolt pattern with a 64.1mm center bore and 45mm offset. When selecting aftermarket wheels, hub-centric rings are mandatory to ensure the wheel is centered on the hub, preventing vibrations and stress on lug studs. The offset is sensitive; staying within ±5mm of 45mm is recommended to avoid rubbing or clearance issues with suspension and brake components. Always use lug nuts with the correct thread pitch (12x1.5) and seat type—factory wheels use a ball seat, while many aftermarket wheels require a conical (60-degree) seat. Using the wrong seat can lead to loose wheels and catastrophic failure. Re-torque lug nuts after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Acura MDX appears from 2001 to 2024 (23 model years). Across model years, this model appears with 2 bolt patterns (5x114.3, 5x120).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 10.0 mm
Quick Tips & Safety Warnings
- ✅ Always use hub-centric rings (64.1mm ID to aftermarket bore) to prevent vibrations and ensure proper load distribution.
- ✅ Stick to offset between 40-50mm to avoid tire rubbing on struts or fenders; test fit before final installation.
- ✅ Re-torque lug nuts to 80 ft-lbs after 50-100 miles, as wheels can settle and loosen.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2001 Acura MDX — Frequently Asked Questions
What is the bolt pattern for a 2001 Acura MDX?
The 2001 Acura MDX uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 64.1mm and the offset is 45mm.
What other years of Acura MDX have the same bolt pattern as the 2001?
The Acura MDX uses the 5x114.3 pattern from 2001 through 2016. Wheels from any of these model years are dimensionally compatible with the 2001, provided the offset and center bore also match.
Do 2001 Acura MDXs use lug bolts or lug nuts?
The 2001 MDX requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Why is matching the 64.1mm center bore important for the 2001 MDX?
The 64.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What lug nut size does the 2001 Acura MDX use?
The 2001 Acura MDX uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
How do I measure the bolt pattern on my 2001 Acura?
The 2001 MDX uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset