2014 Kia Optima Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2014 Kia Optima, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 41 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2014 Optima — Year-Specific Fitment Context
The 2014 Kia Optima is in year 8 of 14 using the 5x114.3 pattern (2007–2020). Wheels from any 2007–2020 Kia Optima are cross-compatible with the 2014 model. Across its full production run (2001–2020), the Optima has also used: 4x114.3.
Kia Optima Bolt Pattern by Year
The table below shows how the Optima's wheel specifications have changed over the years. The 2014 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2001 | 4x114.3 | 67.1 | 46 |
| 2002 | 4x114.3 | 67.1 | 46 |
| 2003 | 4x114.3 | 67.1 | 46 |
| 2004 | 4x114.3 | 67.1 | 46 |
| 2005 | 4x114.3 | 67.1 | 46 |
| 2006 | 4x114.3 | 67.1 | 46 |
| 2007 | 5x114.3 | 67.1 | 46 |
| 2008 | 5x114.3 | 67.1 | 46 |
| 2009 | 5x114.3 | 67.1 | 46 |
| 2010 | 5x114.3 | 67.1 | 41 |
| 2011 | 5x114.3 | 67.1 | 41 |
| 2012 | 5x114.3 | 67.1 | 41 |
| 2013 | 5x114.3 | 67.1 | 41 |
| ▸ 2014 | 5x114.3 | 67.1 | 41 |
| 2015 | 5x114.3 | 67.1 | 41 |
| 2016 | 5x114.3 | 67.1 | 41 |
| 2017 | 5x114.3 | 67.1 | 41 |
| 2018 | 5x114.3 | 67.1 | 35-50 |
| 2019 | 5x114.3 | 67.1 | 35-50 |
| 2020 | 5x114.3 | 67.1 | 35-50 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2014 Kia Optima
For your 2014 Kia Optima, the bolt pattern is 5x114.3 with a center bore of 67.1mm. When selecting aftermarket wheels, ensure they have a center bore of at least 67.1mm; if larger, use hub-centric rings to prevent vibrations and ensure proper load transfer. The factory offset is 41mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.50) and seat type (60-degree conical). Avoid ball-seat lug nuts as they can loosen. Re-torque wheels after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Kia Optima appears from 2001 to 2020 (20 model years). Across model years, this model appears with 2 bolt patterns (4x114.3, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 96.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-100 ft-lbs after 50-100 miles of driving.
- ✅ If using aftermarket wheels, verify hub-centric ring inner diameter matches 67.1mm; outer diameter must match wheel's hub bore.
- ✅ Avoid spacers unless necessary; if used, ensure extended studs and proper offset to maintain safe thread engagement.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2014 Kia Optima — Frequently Asked Questions
What is the bolt pattern for a 2014 Kia Optima?
The 2014 Kia Optima uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 41mm.
What other years of Kia Optima have the same bolt pattern as the 2014?
The Kia Optima uses the 5x114.3 pattern from 2007 through 2020. Wheels from any of these model years are dimensionally compatible with the 2014, provided the offset and center bore also match.
Will wheels from another Kia fit my 2014 Optima?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.
What is the center bore of a 2014 Kia Optima?
The factory center bore (hub bore) for the 2014 Kia Optima is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What is the factory wheel offset for a 2014 Kia Optima?
The OEM offset for the 2014 Optima is typically around 41mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What does 41mm offset mean for the 2014 Optima?
An offset of 41mm means the wheel's mounting surface is 41mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Kia.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset