2004 Mitsubishi Lancer Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2004 Mitsubishi Lancer, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x100 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 56.1 mm |
| Offset (ET) | 45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2004 Lancer — Year-Specific Fitment Context
The 2004 model year is the final year of the Mitsubishi Lancer's 4x100 bolt pattern run (since 2002). Wheels from any 2002–2004 Mitsubishi Lancer are cross-compatible with the 2004 model. Important: starting in 2005, Mitsubishi switched to 4x114.3 — those wheels will not fit the 2004 model. Across its full production run (2002–2017), the Lancer has also used: 4x114.3, 5x114.3.
Mitsubishi Lancer Bolt Pattern by Year
The table below shows how the Lancer's wheel specifications have changed over the years. The 2004 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2002 | 4x100 | 56.1 | 45 |
| 2003 | 4x100 | 56.1 | 45 |
| ▸ 2004 | 4x100 | 56.1 | 45 |
| 2005 | 4x114.3 | 67.1 | 46 |
| 2006 | 4x114.3 | 67.1 | 46 |
| 2007 | 5x114.3 | 67.1 | 46 |
| 2008 | 5x114.3 | 67.1 | 46 |
| 2009 | 5x114.3 | 67.1 | 46 |
| 2010 | 5x114.3 | 67.1 | 46 |
| 2011 | 5x114.3 | 67.1 | 46 |
| 2012 | 5x114.3 | 67.1 | 46 |
| 2013 | 5x114.3 | 67.1 | 46 |
| 2014 | 5x114.3 | 67.1 | 46 |
| 2015 | 5x114.3 | 67.1 | 46 |
| 2016 | 5x114.3 | 67.1 | 46 |
| 2017 | 5x114.3 | 67.1 | 46 |
4x100 Pattern Context
This bolt pattern appears on 461 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 4x100:
Expert Buying Guide for 2004 Mitsubishi Lancer
For your 2004 Mitsubishi Lancer, the bolt pattern is 4x100 with a center bore of 56.1mm. Aftermarket wheels often have a larger center bore, so hub-centric rings (56.1mm to wheel bore) are essential to prevent vibrations and ensure proper load distribution. The factory offset is 45mm; staying within ±5mm is recommended to avoid rubbing or clearance issues. Always use the correct lug nuts: M12x1.50 thread pitch with a conical (60-degree) or ball seat, matching the wheel's seat type. Improper lug nuts can cause wheel loosening. Note: 2005+ Lancer wheels (4x114.3) will not fit.
Historical Fitment Data Reference
In our dataset, Mitsubishi Lancer appears from 2002 to 2017 (16 model years). Across model years, this model appears with 3 bolt patterns (4x100, 4x114.3, 5x114.3).
- Observed bolt-pattern variants for this model: 3
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 1.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to maintain clamping force.
- ✅ Verify wheel hub bore diameter; if larger than 56.1mm, install hub-centric rings to avoid vibration.
- ✅ Check offset clearance: 45mm is optimal; lower offset may cause fender rubbing, higher offset may contact suspension.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2004 Mitsubishi Lancer — Frequently Asked Questions
What is the bolt pattern for a 2004 Mitsubishi Lancer?
The 2004 Mitsubishi Lancer uses a 4x100 bolt pattern (also called lug pattern or PCD). The center bore is 56.1mm and the offset is 45mm.
What other years of Mitsubishi Lancer have the same bolt pattern as the 2004?
The Mitsubishi Lancer uses the 4x100 pattern from 2002 through 2004. Wheels from any of these model years are dimensionally compatible with the 2004, provided the offset and center bore also match.
Will 2005 Mitsubishi Lancer wheels fit a 2004 model?
No. The 2005 Mitsubishi Lancer switched to a 4x114.3 bolt pattern, which is not compatible with the 2004 model's 4x100. Using mismatched patterns is unsafe.
What is the center bore of a 2004 Mitsubishi Lancer?
The factory center bore (hub bore) for the 2004 Mitsubishi Lancer is 56.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Can I use spacers on my 2004 Mitsubishi Lancer?
Yes, but ensure the wheel spacers match the 4x100 bolt pattern and 56.1mm center bore. Also verify that you have enough thread engagement for your N 12x1.50 hardware.
Why is matching the 56.1mm center bore important for the 2004 Lancer?
The 56.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset