2004 Mitsubishi Diamante Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2004 Mitsubishi Diamante, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x100 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 56.1 mm |
| Offset (ET) | 35 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2004 Diamante — Year-Specific Fitment Context
The 2004 is the only model year of the Mitsubishi Diamante in our database using the 4x100 bolt pattern. Note: the 2003 model used a different pattern (5x114.3), so its wheels are NOT interchangeable with the 2004. Across its full production run (1992–2004), the Diamante has also used: 5x114.3.
Mitsubishi Diamante Bolt Pattern by Year
The table below shows how the Diamante's wheel specifications have changed over the years. The 2004 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x114.3 | 67.1 | 38-46 |
| 1993 | 5x114.3 | 67.1 | 38-46 |
| 1994 | 5x114.3 | 67.1 | 38-46 |
| 1995 | 5x114.3 | 67.1 | 38-46 |
| 1996 | 5x114.3 | 67.1 | 38-46 |
| 1997 | 5x114.3 | 67.1 | 38-46 |
| 1998 | 5x114.3 | 67.1 | 38-46 |
| 1999 | 5x114.3 | 67.1 | 38-46 |
| 2000 | 5x114.3 | 67.1 | 38-46 |
| 2001 | 5x114.3 | 67.1 | 38-46 |
| 2002 | 5x114.3 | 67.1 | 38-46 |
| 2003 | 5x114.3 | 67.1 | 38-46 |
| ▸ 2004 | 4x100 | 56.1 | 35 |
Fitment Notes
The 2004 Mitsubishi Diamante has a bolt pattern of 4x100.
This means it is a 4 lug pattern with a circle diameter of 100mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Mitsubishi Diamante appears from 1992 to 2004 (13 model years).
Across model years, this model appears with 2 bolt patterns (4x100, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 84.0 mm
4x100 Pattern Context
This bolt pattern appears on 461 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 4x100:
2004 Mitsubishi Diamante — Frequently Asked Questions
What is the bolt pattern for a 2004 Mitsubishi Diamante?
The 2004 Mitsubishi Diamante uses a 4x100 bolt pattern (also called lug pattern or PCD). The center bore is 56.1mm and the offset is 35mm.
Can I use 2003 Mitsubishi Diamante wheels on a 2004?
No. The 2003 Diamante used a 5x114.3 bolt pattern, which differs from the 2004's 4x100. They are not interchangeable.
Do 2004 Mitsubishi Diamantes use lug bolts or lug nuts?
The 2004 Diamante requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Can I put aftermarket wheels on my 2004 Mitsubishi Diamante?
Absolutely. Just ensure the aftermarket wheels have a 4x100 bolt pattern, an offset near 35mm, and a center bore of at least 56.1mm (using hub rings if larger).
How tight should I torque the lug nuts on a 2004 Mitsubishi Diamante?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the center bore of a 2004 Mitsubishi Diamante?
The factory center bore (hub bore) for the 2004 Mitsubishi Diamante is 56.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Editorial Fitment Notes
Mitsubishi Diamante has multiple wheel-fitment records across generations, so matching exact year and trim is important before ordering wheels.
- Observed production years in our database: 1992-2004 (13 model years).
- Observed bolt-pattern variants: 2 (4x100, 5x114.3).
- Observed total offset span across years: 84.0 mm.
- Observed center-bore variants: 2 | lug-size variants: 2.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2004 Mitsubishi Diamante, please report it via our About page contact so we can verify and update this record.