1999 Mitsubishi Diamante Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1999 Mitsubishi Diamante, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 38-46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
1999 Diamante — Year-Specific Fitment Context
The 1999 Mitsubishi Diamante is in year 8 of 12 using the 5x114.3 pattern (1992–2003). Wheels from any 1992–2003 Mitsubishi Diamante are cross-compatible with the 1999 model. Across its full production run (1992–2004), the Diamante has also used: 4x100.
Mitsubishi Diamante Bolt Pattern by Year
The table below shows how the Diamante's wheel specifications have changed over the years. The 1999 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x114.3 | 67.1 | 38-46 |
| 1993 | 5x114.3 | 67.1 | 38-46 |
| 1994 | 5x114.3 | 67.1 | 38-46 |
| 1995 | 5x114.3 | 67.1 | 38-46 |
| 1996 | 5x114.3 | 67.1 | 38-46 |
| 1997 | 5x114.3 | 67.1 | 38-46 |
| 1998 | 5x114.3 | 67.1 | 38-46 |
| ▸ 1999 | 5x114.3 | 67.1 | 38-46 |
| 2000 | 5x114.3 | 67.1 | 38-46 |
| 2001 | 5x114.3 | 67.1 | 38-46 |
| 2002 | 5x114.3 | 67.1 | 38-46 |
| 2003 | 5x114.3 | 67.1 | 38-46 |
| 2004 | 4x100 | 56.1 | 35 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 1999 Mitsubishi Diamante
For the 1999 Mitsubishi Diamante, the bolt pattern is 5x114.3 with a center bore of 67.1mm. Aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load transfer. The offset range is 38-46mm; staying within this range avoids rubbing on suspension or fenders. Always use lug nuts with the correct thread pitch (12x1.5) and seat type—factory wheels use a ball seat, while many aftermarket wheels require a conical (60-degree) seat. Mismatched lug nuts can cause wheel loosening. Verify fitment with a test fit before final installation.
Historical Fitment Data Reference
In our dataset, Mitsubishi Diamante appears from 1992 to 2004 (13 model years). Across model years, this model appears with 2 bolt patterns (4x100, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 84.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ If using aftermarket wheels, confirm the center bore is at least 67.1mm and use hub-centric rings if larger.
- ✅ Check that the wheel spokes clear the brake calipers, especially with lower offsets near 38mm.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1999 Mitsubishi Diamante — Frequently Asked Questions
What is the bolt pattern for a 1999 Mitsubishi Diamante?
The 1999 Mitsubishi Diamante uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 38-46mm.
What other years of Mitsubishi Diamante have the same bolt pattern as the 1999?
The Mitsubishi Diamante uses the 5x114.3 pattern from 1992 through 2003. Wheels from any of these model years are dimensionally compatible with the 1999, provided the offset and center bore also match.
Will wheels from another Mitsubishi fit my 1999 Diamante?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.
What is the factory wheel offset for a 1999 Mitsubishi Diamante?
The OEM offset for the 1999 Diamante is typically around 38-46mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How do I measure the bolt pattern on my 1999 Mitsubishi?
The 1999 Diamante uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Can I put aftermarket wheels on my 1999 Mitsubishi Diamante?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 38-46mm, and a center bore of at least 67.1mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset