1994 Mitsubishi Diamante Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1994 Mitsubishi Diamante, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 38-46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
1994 Diamante — Year-Specific Fitment Context
The 1994 Mitsubishi Diamante is in year 3 of 12 using the 5x114.3 pattern (1992–2003). Wheels from any 1992–2003 Mitsubishi Diamante are cross-compatible with the 1994 model. Across its full production run (1992–2004), the Diamante has also used: 4x100.
Mitsubishi Diamante Bolt Pattern by Year
The table below shows how the Diamante's wheel specifications have changed over the years. The 1994 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x114.3 | 67.1 | 38-46 |
| 1993 | 5x114.3 | 67.1 | 38-46 |
| ▸ 1994 | 5x114.3 | 67.1 | 38-46 |
| 1995 | 5x114.3 | 67.1 | 38-46 |
| 1996 | 5x114.3 | 67.1 | 38-46 |
| 1997 | 5x114.3 | 67.1 | 38-46 |
| 1998 | 5x114.3 | 67.1 | 38-46 |
| 1999 | 5x114.3 | 67.1 | 38-46 |
| 2000 | 5x114.3 | 67.1 | 38-46 |
| 2001 | 5x114.3 | 67.1 | 38-46 |
| 2002 | 5x114.3 | 67.1 | 38-46 |
| 2003 | 5x114.3 | 67.1 | 38-46 |
| 2004 | 4x100 | 56.1 | 35 |
Fitment Notes
The 1994 Mitsubishi Diamante has a bolt pattern of 5x114.3.
Imperial Conversion: This bolt pattern is commonly referred to as 5x4.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x4.5".
This means it is a 5 lug pattern with a circle diameter of 114.3mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Mitsubishi Diamante appears from 1992 to 2004 (13 model years).
Across model years, this model appears with 2 bolt patterns (4x100, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 84.0 mm
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
1994 Mitsubishi Diamante — Frequently Asked Questions
What is the bolt pattern for a 1994 Mitsubishi Diamante?
The 1994 Mitsubishi Diamante uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 38-46mm.
What other years of Mitsubishi Diamante have the same bolt pattern as the 1994?
The Mitsubishi Diamante uses the 5x114.3 pattern from 1992 through 2003. Wheels from any of these model years are dimensionally compatible with the 1994, provided the offset and center bore also match.
Can I use spacers on my 1994 Mitsubishi Diamante?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your 12x1.5 hardware.
What lug nut size does the 1994 Mitsubishi Diamante use?
The 1994 Mitsubishi Diamante uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Can I put aftermarket wheels on my 1994 Mitsubishi Diamante?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 38-46mm, and a center bore of at least 67.1mm (using hub rings if larger).
What is the PCD for a 1994 Mitsubishi Diamante?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 1994 Diamante, the PCD is 5x114.3.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Editorial Fitment Notes
Mitsubishi Diamante has multiple wheel-fitment records across generations, so matching exact year and trim is important before ordering wheels.
- Observed production years in our database: 1992-2004 (13 model years).
- Observed bolt-pattern variants: 2 (4x100, 5x114.3).
- Observed total offset span across years: 84.0 mm.
- Observed center-bore variants: 2 | lug-size variants: 2.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 1994 Mitsubishi Diamante, please report it via our About page contact so we can verify and update this record.