2002 Mitsubishi Diamante Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2002 Mitsubishi Diamante, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 38-46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2002 Diamante — Year-Specific Fitment Context
The 2002 Mitsubishi Diamante is in year 11 of 12 using the 5x114.3 pattern (1992–2003). Wheels from any 1992–2003 Mitsubishi Diamante are cross-compatible with the 2002 model. Across its full production run (1992–2004), the Diamante has also used: 4x100.
Mitsubishi Diamante Bolt Pattern by Year
The table below shows how the Diamante's wheel specifications have changed over the years. The 2002 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x114.3 | 67.1 | 38-46 |
| 1993 | 5x114.3 | 67.1 | 38-46 |
| 1994 | 5x114.3 | 67.1 | 38-46 |
| 1995 | 5x114.3 | 67.1 | 38-46 |
| 1996 | 5x114.3 | 67.1 | 38-46 |
| 1997 | 5x114.3 | 67.1 | 38-46 |
| 1998 | 5x114.3 | 67.1 | 38-46 |
| 1999 | 5x114.3 | 67.1 | 38-46 |
| 2000 | 5x114.3 | 67.1 | 38-46 |
| 2001 | 5x114.3 | 67.1 | 38-46 |
| ▸ 2002 | 5x114.3 | 67.1 | 38-46 |
| 2003 | 5x114.3 | 67.1 | 38-46 |
| 2004 | 4x100 | 56.1 | 35 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2002 Mitsubishi Diamante
For your 2002 Mitsubishi Diamante, the bolt pattern is 5x114.3 with a center bore of 67.1mm. When selecting aftermarket wheels, ensure they are hub-centric or use hub-centric rings to prevent vibrations. The offset range is 38-46mm; staying within this ensures proper clearance and handling. Always use lug nuts with the correct thread pitch (12x1.5) and seat type (cone or ball seat) to avoid wheel loosening. Cross-compatible wheels from 1992–2003 Diamantes fit directly. Safety first: improper fitment can lead to wheel failure.
Historical Fitment Data Reference
In our dataset, Mitsubishi Diamante appears from 1992 to 2004 (13 model years). Across model years, this model appears with 2 bolt patterns (4x100, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 84.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to maintain clamping force.
- ✅ Avoid using wheels with a center bore larger than 67.1mm without hub-centric rings; vibrations may occur.
- ✅ Check that aftermarket wheels do not contact brake calipers or suspension components due to offset variations.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2002 Mitsubishi Diamante — Frequently Asked Questions
What is the bolt pattern for a 2002 Mitsubishi Diamante?
The 2002 Mitsubishi Diamante uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 38-46mm.
What other years of Mitsubishi Diamante have the same bolt pattern as the 2002?
The Mitsubishi Diamante uses the 5x114.3 pattern from 1992 through 2003. Wheels from any of these model years are dimensionally compatible with the 2002, provided the offset and center bore also match.
What is the PCD for a 2002 Mitsubishi Diamante?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2002 Diamante, the PCD is 5x114.3.
Will wheels from another Mitsubishi fit my 2002 Diamante?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.
How do I measure the bolt pattern on my 2002 Mitsubishi?
The 2002 Diamante uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Why is matching the 67.1mm center bore important for the 2002 Diamante?
The 67.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset