2001 Mitsubishi Diamante Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2001 Mitsubishi Diamante, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 38-46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2001 Diamante — Year-Specific Fitment Context
The 2001 Mitsubishi Diamante is in year 10 of 12 using the 5x114.3 pattern (1992–2003). Wheels from any 1992–2003 Mitsubishi Diamante are cross-compatible with the 2001 model. Across its full production run (1992–2004), the Diamante has also used: 4x100.
Mitsubishi Diamante Bolt Pattern by Year
The table below shows how the Diamante's wheel specifications have changed over the years. The 2001 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x114.3 | 67.1 | 38-46 |
| 1993 | 5x114.3 | 67.1 | 38-46 |
| 1994 | 5x114.3 | 67.1 | 38-46 |
| 1995 | 5x114.3 | 67.1 | 38-46 |
| 1996 | 5x114.3 | 67.1 | 38-46 |
| 1997 | 5x114.3 | 67.1 | 38-46 |
| 1998 | 5x114.3 | 67.1 | 38-46 |
| 1999 | 5x114.3 | 67.1 | 38-46 |
| 2000 | 5x114.3 | 67.1 | 38-46 |
| ▸ 2001 | 5x114.3 | 67.1 | 38-46 |
| 2002 | 5x114.3 | 67.1 | 38-46 |
| 2003 | 5x114.3 | 67.1 | 38-46 |
| 2004 | 4x100 | 56.1 | 35 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2001 Mitsubishi Diamante
The 2001 Mitsubishi Diamante uses a 5x114.3 bolt pattern with a 67.1mm center bore. When selecting aftermarket wheels, ensure hub-centric rings are used to match the bore precisely, preventing vibrations and ensuring proper load distribution. The offset range is 38-46mm; staying within this range maintains suspension geometry and prevents rubbing. Always use lug nuts with the correct thread pitch (12x1.5) and seat type—either conical (60-degree) or ball seat, as specified by the wheel manufacturer. Mixing seat types can cause wheel loosening. Re-torque lug nuts after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Mitsubishi Diamante appears from 1992 to 2004 (13 model years). Across model years, this model appears with 2 bolt patterns (4x100, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 84.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using wheels from 1992-1994 Diamantes, which may have a 4x100 pattern; verify bolt pattern before purchase.
- ✅ Check for caliper clearance with aftermarket wheels, especially if offset is near the lower end of the range (38mm).
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2001 Mitsubishi Diamante — Frequently Asked Questions
What is the bolt pattern for a 2001 Mitsubishi Diamante?
The 2001 Mitsubishi Diamante uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 38-46mm.
What other years of Mitsubishi Diamante have the same bolt pattern as the 2001?
The Mitsubishi Diamante uses the 5x114.3 pattern from 1992 through 2003. Wheels from any of these model years are dimensionally compatible with the 2001, provided the offset and center bore also match.
What does 38-46mm offset mean for the 2001 Diamante?
An offset of 38-46mm means the wheel's mounting surface is 38-46mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Mitsubishi.
What is the PCD for a 2001 Mitsubishi Diamante?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2001 Diamante, the PCD is 5x114.3.
What is the center bore of a 2001 Mitsubishi Diamante?
The factory center bore (hub bore) for the 2001 Mitsubishi Diamante is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What lug nut size does the 2001 Mitsubishi Diamante use?
The 2001 Mitsubishi Diamante uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset