2007 Mitsubishi Eclipse Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2007 Mitsubishi Eclipse, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x100 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 56.1 mm |
| Offset (ET) | 35 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2007 Eclipse — Year-Specific Fitment Context
The 2007 model year marks the beginning of the Mitsubishi Eclipse's 4x100 bolt pattern era, which continued through 2012 (6 consecutive years). Wheels from any 2007–2012 Mitsubishi Eclipse are cross-compatible with the 2007 model. Note: the 2006 model used a different pattern (5x114.3), so its wheels are NOT interchangeable with the 2007. Across its full production run (1992–2012), the Eclipse has also used: 5x114.3.
Mitsubishi Eclipse Bolt Pattern by Year
The table below shows how the Eclipse's wheel specifications have changed over the years. The 2007 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x114.3 | 67.1 | 38-46 |
| 1993 | 5x114.3 | 67.1 | 38-46 |
| 1994 | 5x114.3 | 67.1 | 46 |
| 1995 | 5x114.3 | 67.1 | 46 |
| 1996 | 5x114.3 | 67.1 | 46 |
| 1997 | 5x114.3 | 67.1 | 46 |
| 1998 | 5x114.3 | 67.1 | 46 |
| 1999 | 5x114.3 | 67.1 | 46 |
| 2000 | 5x114.3 | 67.1 | 46 |
| 2001 | 5x114.3 | 67.1 | 46 |
| 2002 | 5x114.3 | 67.1 | 46 |
| 2003 | 5x114.3 | 67.1 | 46 |
| 2004 | 5x114.3 | 67.1 | 46 |
| 2005 | 5x114.3 | 67.1 | 46 |
| 2006 | 5x114.3 | 67.1 | 46 |
| ▸ 2007 | 4x100 | 56.1 | 35 |
| 2008 | 4x100 | 56.1 | 35 |
| 2009 | 4x100 | 56.1 | 35 |
| 2010 | 4x100 | 56.1 | 35 |
| 2011 | 4x100 | 56.1 | 35 |
| 2012 | 4x100 | 56.1 | 35 |
4x100 Pattern Context
This bolt pattern appears on 461 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 4x100:
Expert Buying Guide for 2007 Mitsubishi Eclipse
The 2007 Mitsubishi Eclipse uses a 4x100 bolt pattern with a 56.1mm center bore. When selecting aftermarket wheels, ensure they are hub-centric or use hub-centric rings to prevent vibrations. The recommended offset is 35mm; deviations may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.50) and seat type (conical/60-degree). Improper lug nuts can lead to wheel loosening. Verify that wheels from 2007-2012 Eclipse models are compatible, but avoid 2006 or earlier models which use a 5x114.3 pattern.
Historical Fitment Data Reference
In our dataset, Mitsubishi Eclipse appears from 1992 to 2012 (21 model years). Across model years, this model appears with 2 bolt patterns (4x100, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 3
- Observed total offset span across years: 92.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Check for caliper clearance when using aftermarket wheels, as the Eclipse has tight tolerances.
- ✅ Use hub-centric rings if the wheel's center bore is larger than 56.1mm to avoid vibrations.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2007 Mitsubishi Eclipse — Frequently Asked Questions
What is the bolt pattern for a 2007 Mitsubishi Eclipse?
The 2007 Mitsubishi Eclipse uses a 4x100 bolt pattern (also called lug pattern or PCD). The center bore is 56.1mm and the offset is 35mm.
What other years of Mitsubishi Eclipse have the same bolt pattern as the 2007?
The Mitsubishi Eclipse uses the 4x100 pattern from 2007 through 2012. Wheels from any of these model years are dimensionally compatible with the 2007, provided the offset and center bore also match.
Can I use 2006 Mitsubishi Eclipse wheels on a 2007?
No. The 2006 Eclipse used a 5x114.3 bolt pattern, which differs from the 2007's 4x100. They are not interchangeable.
What does 35mm offset mean for the 2007 Eclipse?
An offset of 35mm means the wheel's mounting surface is 35mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Mitsubishi.
What is the factory wheel offset for a 2007 Mitsubishi Eclipse?
The OEM offset for the 2007 Eclipse is typically around 35mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How tight should I torque the lug nuts on a 2007 Mitsubishi Eclipse?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset