1993 Mitsubishi Eclipse Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1993 Mitsubishi Eclipse, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 38-46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
1993 Eclipse — Year-Specific Fitment Context
The 1993 Mitsubishi Eclipse is in year 2 of 15 using the 5x114.3 pattern (1992–2006). Wheels from any 1992–2006 Mitsubishi Eclipse are cross-compatible with the 1993 model. Across its full production run (1992–2012), the Eclipse has also used: 4x100.
Mitsubishi Eclipse Bolt Pattern by Year
The table below shows how the Eclipse's wheel specifications have changed over the years. The 1993 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x114.3 | 67.1 | 38-46 |
| ▸ 1993 | 5x114.3 | 67.1 | 38-46 |
| 1994 | 5x114.3 | 67.1 | 46 |
| 1995 | 5x114.3 | 67.1 | 46 |
| 1996 | 5x114.3 | 67.1 | 46 |
| 1997 | 5x114.3 | 67.1 | 46 |
| 1998 | 5x114.3 | 67.1 | 46 |
| 1999 | 5x114.3 | 67.1 | 46 |
| 2000 | 5x114.3 | 67.1 | 46 |
| 2001 | 5x114.3 | 67.1 | 46 |
| 2002 | 5x114.3 | 67.1 | 46 |
| 2003 | 5x114.3 | 67.1 | 46 |
| 2004 | 5x114.3 | 67.1 | 46 |
| 2005 | 5x114.3 | 67.1 | 46 |
| 2006 | 5x114.3 | 67.1 | 46 |
| 2007 | 4x100 | 56.1 | 35 |
| 2008 | 4x100 | 56.1 | 35 |
| 2009 | 4x100 | 56.1 | 35 |
| 2010 | 4x100 | 56.1 | 35 |
| 2011 | 4x100 | 56.1 | 35 |
| 2012 | 4x100 | 56.1 | 35 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 1993 Mitsubishi Eclipse
The 1993 Mitsubishi Eclipse uses a 5x114.3 bolt pattern with a 67.1mm center bore. When selecting aftermarket wheels, hub-centric rings are essential to match the bore and prevent vibrations. Offset must stay within 38-46mm to avoid rubbing or clearance issues. Always use 12x1.5 lug nuts with the correct seat type (cone or ball) to ensure proper clamping force. Re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, Mitsubishi Eclipse appears from 1992 to 2012 (21 model years). Across model years, this model appears with 2 bolt patterns (4x100, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 3
- Observed total offset span across years: 92.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles of driving.
- ✅ Avoid wheels with offset below 38mm to prevent fender rubbing.
- ✅ Use hub-centric rings for aftermarket wheels to eliminate vibrations.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1993 Mitsubishi Eclipse — Frequently Asked Questions
What is the bolt pattern for a 1993 Mitsubishi Eclipse?
The 1993 Mitsubishi Eclipse uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 38-46mm.
What other years of Mitsubishi Eclipse have the same bolt pattern as the 1993?
The Mitsubishi Eclipse uses the 5x114.3 pattern from 1992 through 2006. Wheels from any of these model years are dimensionally compatible with the 1993, provided the offset and center bore also match.
What is the factory wheel offset for a 1993 Mitsubishi Eclipse?
The OEM offset for the 1993 Eclipse is typically around 38-46mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How tight should I torque the lug nuts on a 1993 Mitsubishi Eclipse?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What does 38-46mm offset mean for the 1993 Eclipse?
An offset of 38-46mm means the wheel's mounting surface is 38-46mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Mitsubishi.
Can I use spacers on my 1993 Mitsubishi Eclipse?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your 12x1.5 hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset