2005 Mitsubishi Eclipse Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2005 Mitsubishi Eclipse, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | M 12x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2005 Eclipse — Year-Specific Fitment Context
The 2005 Mitsubishi Eclipse is in year 14 of 15 using the 5x114.3 pattern (1992–2006). Wheels from any 1992–2006 Mitsubishi Eclipse are cross-compatible with the 2005 model. Across its full production run (1992–2012), the Eclipse has also used: 4x100.
Mitsubishi Eclipse Bolt Pattern by Year
The table below shows how the Eclipse's wheel specifications have changed over the years. The 2005 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x114.3 | 67.1 | 38-46 |
| 1993 | 5x114.3 | 67.1 | 38-46 |
| 1994 | 5x114.3 | 67.1 | 46 |
| 1995 | 5x114.3 | 67.1 | 46 |
| 1996 | 5x114.3 | 67.1 | 46 |
| 1997 | 5x114.3 | 67.1 | 46 |
| 1998 | 5x114.3 | 67.1 | 46 |
| 1999 | 5x114.3 | 67.1 | 46 |
| 2000 | 5x114.3 | 67.1 | 46 |
| 2001 | 5x114.3 | 67.1 | 46 |
| 2002 | 5x114.3 | 67.1 | 46 |
| 2003 | 5x114.3 | 67.1 | 46 |
| 2004 | 5x114.3 | 67.1 | 46 |
| ▸ 2005 | 5x114.3 | 67.1 | 46 |
| 2006 | 5x114.3 | 67.1 | 46 |
| 2007 | 4x100 | 56.1 | 35 |
| 2008 | 4x100 | 56.1 | 35 |
| 2009 | 4x100 | 56.1 | 35 |
| 2010 | 4x100 | 56.1 | 35 |
| 2011 | 4x100 | 56.1 | 35 |
| 2012 | 4x100 | 56.1 | 35 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2005 Mitsubishi Eclipse
When selecting aftermarket wheels for your 2005 Mitsubishi Eclipse, the 5x114.3 bolt pattern is shared with 1992–2006 models, ensuring broad compatibility. However, the 67.1mm center bore is critical: aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load transfer. Offset is sensitive; the factory 46mm offset balances handling and clearance. Straying too far (e.g., +30mm) may cause rubbing on suspension or fenders. Always verify lug nut thread pitch (M12x1.5) and seat type—use conical (60-degree) or ball seat lugs matching the wheel. Never use incorrect lugs; they can loosen or damage the wheel. For safety, re-torque after 50–100 miles.
Historical Fitment Data Reference
In our dataset, Mitsubishi Eclipse appears from 1992 to 2012 (21 model years). Across model years, this model appears with 2 bolt patterns (4x100, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 3
- Observed total offset span across years: 92.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80–90 ft-lbs after 50–100 miles of driving to ensure proper seating.
- ✅ Avoid using wheels with a center bore larger than 67.1mm without hub-centric rings; otherwise, vibrations and stress on studs may occur.
- ✅ Check brake caliper clearance when changing offset; the 2005 Eclipse has tight tolerances, especially with wider wheels.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2005 Mitsubishi Eclipse — Frequently Asked Questions
What is the bolt pattern for a 2005 Mitsubishi Eclipse?
The 2005 Mitsubishi Eclipse uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 46mm.
What other years of Mitsubishi Eclipse have the same bolt pattern as the 2005?
The Mitsubishi Eclipse uses the 5x114.3 pattern from 1992 through 2006. Wheels from any of these model years are dimensionally compatible with the 2005, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2005 Mitsubishi Eclipse?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 46mm, and a center bore of at least 67.1mm (using hub rings if larger).
Can I use spacers on my 2005 Mitsubishi Eclipse?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your M 12x1.50 hardware.
What does 46mm offset mean for the 2005 Eclipse?
An offset of 46mm means the wheel's mounting surface is 46mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Mitsubishi.
How do I measure the bolt pattern on my 2005 Mitsubishi?
The 2005 Eclipse uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset