2025 MAZDA CX-50 Bolt Pattern

Quick Answer: The factory bolt pattern (lug pattern) for a 2025 MAZDA CX-50 is 5x114.3 (5x4.5"). It has a center bore of 67.1 mm, an offset range of 35-45, and utilizes 14x1.5 (Flat seat, 21mm hex) fasteners tightened to 80-87 ft-lbs (108-118 Nm).

2025 MAZDA CX-50 Wheel Fitment Specs

Bolt Pattern (Lug Pattern) 5x114.3 (5x4.5")
Center Bore (Hub Bore) 67.1 mm
Offset Range (ET) 35-45
Thread Size (Lug Nut / Bolt) 14x1.5
Fastener Seat Type Flat / Mag Seat (Washer)
Lug Wrench / Socket Hex Size 21mm
Wheel Torque Specs 80-87 ft-lbs (108-118 Nm)
💡

Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.

🛠️ Managing a shop, wheel inventory, or app? Stop searching one by one.
Download 12,902 Vehicle Database (CSV) →
🔍 Check fitment for other vehicles using our Ultimate Bolt Pattern Finder tool →

2025 CX-50 — Year-Specific Fitment Context

The 2025 MAZDA CX-50 is in year 3 of 4 using the 5x114.3 pattern (2023–2026). Wheels from any 2023–2026 MAZDA CX-50 are cross-compatible with the 2025 model.

MAZDA CX-50 Bolt Pattern by Year

Looking for all generations? View the complete MAZDA CX-50 (2023–2026) Bolt Pattern & Generation Guide →

The table below shows how the CX-50's wheel specifications have changed over the years. The 2025 model year is highlighted.

Year Bolt Pattern Center Bore Offset
2023 5x114.3 67.1 45-50
2024 5x114.3 67.1 45-50
▸ 2025 5x114.3 67.1 35-45
2026 5x114.3 67.1 35-45

2025 MAZDA CX-50 Wheel Interchange & Donor Fitment Guide (5x114.3)

The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2025 MAZDA CX-50, donor rims must match the 5x114.3 PCD and have a center bore of at least 67.1 mm:

DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 67.1mm Center Bore (No Hub Rings Needed)

Compatible Donor Vehicle Center Bore OEM Offset (ET) Lug Thread & Seat
2025 Lotus Emira 67.1 mm (Exact) 35-45 14x1.5 (Ball)
2024 Maserati Ghibli 67.1 mm (Exact) 45 14x1.5 (Cone)
2025 Maserati Grancabrio 67.1 mm (Exact) 35-45 14x1.5 (Ball)
2025 Maserati GranTurismo 67.1 mm (Exact) 35-45 14x1.5 (Ball)
2024 Maserati Levante 67.1 mm (Exact) 45 14x1.5 (Cone)
2025 Maserati MC20 67.1 mm (Exact) 35-45 14x1.5 (Ball)

HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)

Donor Vehicle Donor Bore Required Hub Ring (OD → ID) OEM Offset (ET)
1994 Lincoln Continental 70.3 mm 70.3mm → 67.1mm 40
1993 Lincoln Town Car 70.3 mm 70.3mm → 67.1mm 10
2018 Lotus Evora 400 68.1 mm 68.1mm → 67.1mm 52 front, 69 rear
2021 Lotus Evora GT 68.0 mm 68.0mm → 67.1mm 50-60mm
2021 Maserati Quattroporte 78.1 mm 78.1mm → 67.1mm 45
1994 Mercury Grand Marquis 70.5 mm 70.5mm → 67.1mm 0-40
Looking for all models? View the complete directory of vehicles with 5x114.3 bolt pattern →

Quick Tips & Safety Warnings

Ready to upgrade or perform maintenance?

🛒 Shop Tools & Accessories on Amazon

As an Amazon Associate, I earn from qualifying purchases.

2025 MAZDA CX-50 — Frequently Asked Questions

What is the bolt pattern for a 2025 MAZDA CX-50?

The 2025 MAZDA CX-50 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 35-45mm.

What other years of MAZDA CX-50 have the same bolt pattern as the 2025?

The MAZDA CX-50 uses the 5x114.3 pattern from 2023 through 2026. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.

How tight should I torque the lug nuts on a 2025 MAZDA CX-50?

Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.

What is the center bore of a 2025 MAZDA CX-50?

The factory center bore (hub bore) for the 2025 MAZDA CX-50 is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.

Can I put aftermarket wheels on my 2025 MAZDA CX-50?

Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 35-45mm, and a center bore of at least 67.1mm (using hub rings if larger).

Do 2025 MAZDA CX-50s use lug bolts or lug nuts?

The 2025 CX-50 requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.

For Tire & Wheel Shops, Shopify Stores & Developers

Running a Tire Shop or Wheel Store?

Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.

Get Master Spreadsheet (CSV) →
Confidence Level
Medium
Verified Source
Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last Updated
2026-11-18

MAZDA CX-50 By Year

2023 2024 2025 2026

Other MAZDA Models

323 626 B-Series Cab Plus B-Series Regular Cab CX-3 CX-30 CX-5 CX-50 CX-70 MAZDA3 MAZDA5 MAZDA6 MX-30 MX-5 Miata MX-5 Miata RF Millenia Navajo Protege5 RX-7 Tribute

Popular Vehicle Fitment

▶ Ford Mustang Specs ▶ Chevy Tahoe Specs ▶ Honda Civic Specs ▶ Ford F-150 Specs ▶ Toyota Camry Specs

Common Bolt Patterns

▶ 5x114.3 (5x4.5") ▶ 6x139.7 (6x5.5") ▶ 5x120 ▶ 5x127 (5x5") ▶ 5x112 (European)