2024 MAZDA CX-50 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2024 MAZDA CX-50, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 45-50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2024 CX-50 — Year-Specific Fitment Context
The 2024 model year is the final year of the MAZDA CX-50's 5x114.3 bolt pattern run (since 2023). Wheels from any 2023–2024 MAZDA CX-50 are cross-compatible with the 2024 model.
MAZDA CX-50 Bolt Pattern by Year
The table below shows how the CX-50's wheel specifications have changed over the years. The 2024 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2023 | 5x114.3 | 67.1 | 45-50 |
| ▸ 2024 | 5x114.3 | 67.1 | 45-50 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2024 MAZDA CX-50
For the 2024 MAZDA CX-50, the center bore is 67.1mm. Aftermarket wheels often have a larger bore, so hub-centric rings are mandatory to prevent vibration and ensure proper load distribution. The offset range is tight: 45-50mm. Straying outside this range can cause rubbing or poor handling. Always use lug nuts with the correct thread pitch (12x1.5) and seat type—conical (60-degree) or ball seat, depending on the wheel. Never mix seat types; this can lead to loose wheels. Re-torque after 50-100 miles. This is the final year for the 5x114.3 bolt pattern; 2023-2024 wheels are cross-compatible.
Historical Fitment Data Reference
In our dataset, MAZDA CX-50 appears from 2023 to 2024 (2 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 95.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-100 ft-lbs after 50-100 miles of driving.
- ✅ If using aftermarket wheels, ensure hub-centric rings are installed to match the 67.1mm center bore.
- ✅ Avoid spacers; they can push offset outside the safe 45-50mm range and cause bearing wear.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2024 MAZDA CX-50 — Frequently Asked Questions
What is the bolt pattern for a 2024 MAZDA CX-50?
The 2024 MAZDA CX-50 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 45-50mm.
What other years of MAZDA CX-50 have the same bolt pattern as the 2024?
The MAZDA CX-50 uses the 5x114.3 pattern from 2023 through 2024. Wheels from any of these model years are dimensionally compatible with the 2024, provided the offset and center bore also match.
What lug nut size does the 2024 MAZDA CX-50 use?
The 2024 MAZDA CX-50 uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
How do I measure the bolt pattern on my 2024 MAZDA?
The 2024 CX-50 uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What does 45-50mm offset mean for the 2024 CX-50?
An offset of 45-50mm means the wheel's mounting surface is 45-50mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your MAZDA.
How tight should I torque the lug nuts on a 2024 MAZDA CX-50?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset