2023 MAZDA CX-50 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2023 MAZDA CX-50, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 45-50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2023 CX-50 — Year-Specific Fitment Context
The 2023 model year marks the beginning of the MAZDA CX-50's 5x114.3 bolt pattern era, which continued through 2024 (2 consecutive years). Wheels from any 2023–2024 MAZDA CX-50 are cross-compatible with the 2023 model.
MAZDA CX-50 Bolt Pattern by Year
The table below shows how the CX-50's wheel specifications have changed over the years. The 2023 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| ▸ 2023 | 5x114.3 | 67.1 | 45-50 |
| 2024 | 5x114.3 | 67.1 | 45-50 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2023 MAZDA CX-50
For the 2023 MAZDA CX-50, the bolt pattern is 5x114.3 with a critical center bore of 67.1mm. Aftermarket wheels often have a larger bore, so hub-centric rings (67.1mm ID to your wheel's bore) are mandatory to prevent vibrations and ensure proper load transfer. Offset must stay within 45-50mm; deviating risks rubbing suspension or fenders. Always use lug nuts with the correct thread pitch (12x1.5) and seat type (typically conical/60-degree for aftermarket wheels, but verify). Mismatched seats can cause wheel loosening. Safety first: improper fitment compromises handling and braking.
Historical Fitment Data Reference
In our dataset, MAZDA CX-50 appears from 2023 to 2024 (2 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 95.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to maintain clamping force.
- ✅ Avoid using universal fit wheels without hub rings; the 67.1mm bore is specific and critical.
- ✅ Check inner clearance for offset changes; even 5mm deviation may contact strut or control arm.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2023 MAZDA CX-50 — Frequently Asked Questions
What is the bolt pattern for a 2023 MAZDA CX-50?
The 2023 MAZDA CX-50 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 45-50mm.
What other years of MAZDA CX-50 have the same bolt pattern as the 2023?
The MAZDA CX-50 uses the 5x114.3 pattern from 2023 through 2024. Wheels from any of these model years are dimensionally compatible with the 2023, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2023 MAZDA CX-50?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 45-50mm, and a center bore of at least 67.1mm (using hub rings if larger).
What is the factory wheel offset for a 2023 MAZDA CX-50?
The OEM offset for the 2023 CX-50 is typically around 45-50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Do 2023 MAZDA CX-50s use lug bolts or lug nuts?
The 2023 CX-50 requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the center bore of a 2023 MAZDA CX-50?
The factory center bore (hub bore) for the 2023 MAZDA CX-50 is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset