2011 Mitsubishi Eclipse Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2011 Mitsubishi Eclipse, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x100 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 56.1 mm |
| Offset (ET) | 35 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2011 Eclipse — Year-Specific Fitment Context
The 2011 Mitsubishi Eclipse is in year 5 of 6 using the 4x100 pattern (2007–2012). Wheels from any 2007–2012 Mitsubishi Eclipse are cross-compatible with the 2011 model. Across its full production run (1992–2012), the Eclipse has also used: 5x114.3.
Mitsubishi Eclipse Bolt Pattern by Year
The table below shows how the Eclipse's wheel specifications have changed over the years. The 2011 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x114.3 | 67.1 | 38-46 |
| 1993 | 5x114.3 | 67.1 | 38-46 |
| 1994 | 5x114.3 | 67.1 | 46 |
| 1995 | 5x114.3 | 67.1 | 46 |
| 1996 | 5x114.3 | 67.1 | 46 |
| 1997 | 5x114.3 | 67.1 | 46 |
| 1998 | 5x114.3 | 67.1 | 46 |
| 1999 | 5x114.3 | 67.1 | 46 |
| 2000 | 5x114.3 | 67.1 | 46 |
| 2001 | 5x114.3 | 67.1 | 46 |
| 2002 | 5x114.3 | 67.1 | 46 |
| 2003 | 5x114.3 | 67.1 | 46 |
| 2004 | 5x114.3 | 67.1 | 46 |
| 2005 | 5x114.3 | 67.1 | 46 |
| 2006 | 5x114.3 | 67.1 | 46 |
| 2007 | 4x100 | 56.1 | 35 |
| 2008 | 4x100 | 56.1 | 35 |
| 2009 | 4x100 | 56.1 | 35 |
| 2010 | 4x100 | 56.1 | 35 |
| ▸ 2011 | 4x100 | 56.1 | 35 |
| 2012 | 4x100 | 56.1 | 35 |
4x100 Pattern Context
This bolt pattern appears on 461 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 4x100:
Expert Buying Guide for 2011 Mitsubishi Eclipse
The 2011 Mitsubishi Eclipse uses a 4x100 bolt pattern with a 56.1mm center bore. When selecting aftermarket wheels, ensure the center bore matches or use hub-centric rings to prevent vibrations. The offset is critical; the factory range is 35mm, and deviating more than ±5mm may cause rubbing or clearance issues. Always verify lug nut thread pitch (12x1.50) and seat type—use conical (60-degree) or ball seat lugs as specified. Improper lug nuts can lead to wheel loosening. For cross-compatibility, wheels from 2007–2012 Eclipse models fit directly. Avoid using wheels from earlier generations with 5x114.3 pattern without proper adapters.
Historical Fitment Data Reference
In our dataset, Mitsubishi Eclipse appears from 1992 to 2012 (21 model years). Across model years, this model appears with 2 bolt patterns (4x100, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 3
- Observed total offset span across years: 92.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles of driving to ensure proper seating.
- ✅ If using aftermarket wheels with a larger center bore, install hub-centric rings (56.1mm ID to wheel's bore OD) to avoid vibrations.
- ✅ Check offset carefully; lower offset (e.g., 25mm) may cause fender rubbing, while higher offset (e.g., 45mm) may contact brake calipers or suspension.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2011 Mitsubishi Eclipse — Frequently Asked Questions
What is the bolt pattern for a 2011 Mitsubishi Eclipse?
The 2011 Mitsubishi Eclipse uses a 4x100 bolt pattern (also called lug pattern or PCD). The center bore is 56.1mm and the offset is 35mm.
What other years of Mitsubishi Eclipse have the same bolt pattern as the 2011?
The Mitsubishi Eclipse uses the 4x100 pattern from 2007 through 2012. Wheels from any of these model years are dimensionally compatible with the 2011, provided the offset and center bore also match.
Why is matching the 56.1mm center bore important for the 2011 Eclipse?
The 56.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Will wheels from another Mitsubishi fit my 2011 Eclipse?
Only if they share the exact same 4x100 bolt pattern, a compatible offset, and a center bore equal to or larger than 56.1mm.
What is the center bore of a 2011 Mitsubishi Eclipse?
The factory center bore (hub bore) for the 2011 Mitsubishi Eclipse is 56.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What does 35mm offset mean for the 2011 Eclipse?
An offset of 35mm means the wheel's mounting surface is 35mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Mitsubishi.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset