2025 Nissan Versa Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2025 Nissan Versa, along with offset and center bore data.
2025 Nissan Versa Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 4x100 |
|---|---|
| Lug Nut / Bolt Size | 12x1.25 |
| Center Bore (CB) | 60.1 mm |
| Offset (ET) | 40-45 |
| Torque Specs | 83 ft-lbs (113 Nm) |
2025 Versa — Year-Specific Fitment Context
The 2025 model year is the final year of the Nissan Versa's 4x100 bolt pattern run (since 2007). Wheels from any 2007–2025 Nissan Versa are cross-compatible with the 2025 model.
Nissan Versa Bolt Pattern by Year
The table below shows how the Versa's wheel specifications have changed over the years. The 2025 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2007 | 4x100 | 66.1 | 40 |
| 2008 | 4x100 | 66.1 | 40 |
| 2009 | 4x100 | 66.1 | 40 |
| 2010 | 4x100 | 66.1 | 40 |
| 2011 | 4x100 | 66.1 | 40 |
| 2012 | 4x100 | 66.1 | 40 |
| 2013 | 4x100 | 60.1 | 40 |
| 2014 | 4x100 | 66.1 | 40 |
| 2015 | 4x100 | 60.1 | 40 |
| 2016 | 4x100 | 66.1 | 40 |
| 2017 | 4x100 | 60.1 | 40 |
| 2018 | 4x100 | 66.1 | 40 |
| 2019 | 4x100 | 66.1 | 40 |
| 2020 | 4x100 | 56.1 | 40 |
| 2021 | 4x100 | 56.1 | 40 |
| 2022 | 4x100 | 56.1 | 40 |
| 2023 | 4x100 | 56.1 | 40 |
| 2024 | 4x100 | 56.1 | 40 |
| ▸ 2025 | 4x100 | 60.1 | 40-45 |
4x100 Pattern Context
This bolt pattern appears on 479 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 4x100:
Quick Tips & Safety Warnings
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 83 ft-lbs (113 Nm), then re-check torque after 50-100 km (30-60 miles).
2025 Nissan Versa — Frequently Asked Questions
What is the bolt pattern for a 2025 Nissan Versa?
The 2025 Nissan Versa uses a 4x100 bolt pattern (also called lug pattern or PCD). The center bore is 60.1mm and the offset is 40-45mm.
What other years of Nissan Versa have the same bolt pattern as the 2025?
The Nissan Versa uses the 4x100 pattern from 2007 through 2025. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.
What does 40-45mm offset mean for the 2025 Versa?
An offset of 40-45mm means the wheel's mounting surface is 40-45mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Nissan.
Why is matching the 60.1mm center bore important for the 2025 Versa?
The 60.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
How tight should I torque the lug nuts on a 2025 Nissan Versa?
Refer to your owner's manual for exact specs, but always tighten the 12x1.25 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
How do I measure the bolt pattern on my 2025 Nissan?
The 2025 Versa uses a 4x100 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset