2010 Nissan Versa Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2010 Nissan Versa, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x100 |
|---|---|
| Lug Nut / Bolt Size | 12x1.25 |
| Center Bore (CB) | 60.1 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2010 Versa — Year-Specific Fitment Context
The 2010 Nissan Versa is in year 4 of 18 using the 4x100 pattern (2007–2024). Wheels from any 2007–2024 Nissan Versa are cross-compatible with the 2010 model.
Nissan Versa Bolt Pattern by Year
The table below shows how the Versa's wheel specifications have changed over the years. The 2010 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2007 | 4x100 | 60.1 | 40 |
| 2008 | 4x100 | 60.1 | 40 |
| 2009 | 4x100 | 60.1 | 40 |
| ▸ 2010 | 4x100 | 60.1 | 40 |
| 2011 | 4x100 | 60.1 | 40 |
| 2012 | 4x100 | 60.1 | 40 |
| 2013 | 4x100 | 60.1 | 40 |
| 2014 | 4x100 | 60.1 | 40 |
| 2015 | 4x100 | 60.1 | 40 |
| 2016 | 4x100 | 60.1 | 40 |
| 2017 | 4x100 | 60.1 | 40 |
| 2018 | 4x100 | 60.1 | 40 |
| 2019 | 4x100 | 60.1 | 40 |
| 2020 | 4x100 | 60.1 | 40 |
| 2021 | 4x100 | 60.1 | 40 |
| 2022 | 4x100 | 60.1 | 40 |
| 2023 | 4x100 | 60.1 | 40 |
| 2024 | 4x100 | 60.1 | 40 |
4x100 Pattern Context
This bolt pattern appears on 461 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 4x100:
Expert Buying Guide for 2010 Nissan Versa
For your 2010 Nissan Versa, the bolt pattern is 4x100 with a center bore of 60.1mm. When selecting aftermarket wheels, ensure the center bore matches exactly or use hub-centric rings to prevent vibration and stress on lug studs. The offset is critical: stock is 40mm. Deviating more than ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.25) and seat type (conical/60-degree taper). Flat-seat or ball-seat nuts are unsafe. Verify that aftermarket wheels are load-rated for the Versa's weight. Proper installation and torque to 80 ft-lbs are essential for safety.
Historical Fitment Data Reference
In our dataset, Nissan Versa appears from 2007 to 2024 (18 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using universal fit wheels without hub-centric rings; they can cause vibration and stud failure.
- ✅ Check brake caliper clearance when using wheels with offset less than 35mm or greater than 45mm.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2010 Nissan Versa — Frequently Asked Questions
What is the bolt pattern for a 2010 Nissan Versa?
The 2010 Nissan Versa uses a 4x100 bolt pattern (also called lug pattern or PCD). The center bore is 60.1mm and the offset is 40mm.
What other years of Nissan Versa have the same bolt pattern as the 2010?
The Nissan Versa uses the 4x100 pattern from 2007 through 2024. Wheels from any of these model years are dimensionally compatible with the 2010, provided the offset and center bore also match.
Why is matching the 60.1mm center bore important for the 2010 Versa?
The 60.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Can I use spacers on my 2010 Nissan Versa?
Yes, but ensure the wheel spacers match the 4x100 bolt pattern and 60.1mm center bore. Also verify that you have enough thread engagement for your 12x1.25 hardware.
What is the factory wheel offset for a 2010 Nissan Versa?
The OEM offset for the 2010 Versa is typically around 40mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What does 40mm offset mean for the 2010 Versa?
An offset of 40mm means the wheel's mounting surface is 40mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Nissan.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset